Polaroid FLX-3202, FLX-2602, FLX-3702 manual Locking Volume Control to One Mode Global Volume Lock

Page 47

2.Press and hold SET until the red LED blinks twice; then release.

3.Enter 9-9-0. The LED blinks twice.

4.To view the code for the first digit, press 1. Count the LED blinks (for example, three blinks = 3), and write down the number in the appropriate code listing in step 8 under “Programming a Device”.

NOTE: If a code digit is 0, the LED does not blink.

5.Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit.

6.To check for other device codes, repeat steps 1—5, substituting the device key for TV.

Changing Volume Lock

The remote comes preset to allow independent volume control of each selected device (Global Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one device’s volume will control volume in all other modes. After that, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation or Global Volume Unlock to remove all volume locking.

Locking Volume Control to One Mode (Global Volume Lock)

1.Press and hold SET until the red LED blinks twice; then release.

2.Enter 9-9-3and then press the mode key for the device you want to control volume (for example, TV). The LED blinks twice. Now when you press VOL+, VOL-, or Mute, the selected device (for example, TV) will control the volume regardless of the current mode.

Unlocking All Volume Control (Restoring Global Unlock)

1.Press and hold SET until the red LED blinks twice; then release.

2.Enter 9-9-3and then press VOL+. The LED blinks four times. Volume is now independently controlled for all programmed devices.

Unlocking a Single Device’s Volume Control

1.Press a device key (TV, VCR/DVD, CBL/ SAT, or AUX).

2.Press and hold SET until the red LED blinks twice; then release.

3.Enter 9-9-3and then press VOL-. The LED blinks four times. Volume is now independently controlled for the selected devices.

Troubleshooting

PROBLEM: LED does not blink when you press a key.

SOLUTION: Replace battery with new AA size battery.

PROBLEM: LED blinks when you press a key, but device does not respond.

SOLUTION: Make sure the remote is aimed at your device and is not more than 15 feet away.

PROBLEM: LED blinks one long blink.

SOLUTION: An entry error has occurred (for example, wrong key). Try entry sequence again.

PROBLEM: Remote does not control devices or commands are not working properly.

SOLUTION: Try all listed codes for the device. Make sure the device operates with an infrared remote control.

PROBLEM: CH+, CH-, and LAST do not work for your RCA TV.

SOLUTION: Due to RCA design from 1983 to 1987, only the original remote control will operate these functions.

PROBLEM: No volume on a device.

SOLUTION: See “Changing Volume Lock”.

PROBLEM: Channels do not change properly.

SOLUTION: If the original remote control required you to press Enter to change channels, press Enter on this remote after entering the channel number.

B

Image 47
Contents Page Federal Communications Commission Statement Important Safety Instructions English Outdoor Antenna Safety Instructions Table of Contents Chapter Introducing the LCD TV Key FeaturesPackage Contents Attach the Stand Setting Up Your LCD TVConnect other an external A/V device refer to page14-26 Front/Right Side View and Controls Your LCD TVAudio OUT-STEREO VIDEO2Hdmi VGAVIDEO2/VIDEO3/VIDEO4/VIDEO5 Your Remote ControlInput CH+19NORMAL/FULL/WIDE/ZOOM InfoExit OFF/CC1/CC2/CC3/CC4/TT1/TT2/TT3Connecting a TV Cable or an Antenna Chapter Installing the LCD TVVHF Separate VHF and/or UHF antennasVHF/UHF UHFCable TV Catv Connection Method B Press the button on the remote to turn on the LCD TVMethod a Rear of TV Connecting a VCRRear of TV Right Side Connecting a Video Camera or Play StationMethod C Connecting a DVD PlayerEnglish COMPONENT/AUDIO Cable Connecting an AV Equipment with Hdmi Connector Connecting an AV Equipment with DVI Connector Connecting a PC Connecting to Audio Receiver Press to change input source and press the OK button Using Picture-In-PicturePress the PIP button once to enter picture in picture mode Press the PIP button again to view images side by side Displays at 43 aspect ratio Wide Screen ViewingAudio Menu Operating the MenuVideo Menu Hdtv Menu Setup MenuTV Menu PCM Setting up the Hdtv FunctionHdtv menu includes the following options Using the Program Guide Video menu includes the following options Customizing the Video SettingsSAP Customizing the Audio SettingsAudio menu includes the following options Setup menu includes the following options Customizing the Setup SettingsAllows to select from 4 closed caption modes Rating Description Using the V-CHIP SettingsV-CHIP menu includes the following options Parental menu includes the following options Using the Parental SettingsCable STD/CABLE IRC/CABLE HRC Customizing the TV SettingsTV menu includes the following options AntennaVIDEO/AUDIOL/R WeightFLX-3702 Chapter Programming your Remote Control Unlocking a Single Device’s Volume Control Locking Volume Control to One Mode Global Volume LockUnlocking All Volume Control Restoring Global Unlock Set Codes for Audio Amp/Tuners Set Codes for Audio AmplifiersDKK Set Codes for Cable ConvertersSet Codes for CD Players KNCSet Codes for DVD Players SVA JBLKLH Set Codes for TVs Set Codes for Satellite ReceiversCXC LXI JCBKEC KTVTVS Set Codes for VCRsSSS TMKHI-Q ABSCCE STS MEICare

FLX-3702, FLX-3202, FLX-2602 specifications

The Polaroid FLX series, consisting of the FLX-2602, FLX-3202, and FLX-3702 models, embodies a unique blend of innovation and nostalgia. These modern instant cameras cater to both photography enthusiasts and casual users, striking a perfect balance between high-tech features and the classic Polaroid charm.

The FLX-2602 is designed for the beginner who desires ease of use without sacrificing quality. It incorporates a 20-megapixel sensor, allowing for vibrant and detailed images. With built-in Wi-Fi connectivity, users can easily transfer their favorite shots to smartphones and social media platforms in an instant. This model also features a simple interface with automatic exposure adjustments, ensuring that anyone can film life’s moments effortlessly.

Moving up, the FLX-3202 introduces more advanced capabilities while maintaining user-friendliness. This model boasts a 26-megapixel sensor and enhanced low-light performance due to its improved lens and advanced processing algorithms. The FLX-3202 comes equipped with an intuitive touchscreen display, allowing for easy navigation through settings and quick previews of shots. Moreover, it includes a variety of filters and editing tools, empowering users to customize their photos directly within the camera.

At the top tier, the FLX-3702 offers professional-grade features for those seeking the utmost in photographic creativity. With a striking 32-megapixel sensor, this model features interchangeable lenses, providing versatility for various photography styles. The FLX-3702 also includes advanced manual controls, allowing more experienced photographers to fine-tune their shots. Its robust build ensures durability for outdoor adventures, and the camera's 4K video capability adds an exciting dimension for multimedia creators.

Across the FLX series, the dedicated Polaroid printing technology stands out, producing photos with the signature border that the brand is known for. Each model supports instant printing, enabling users to capture and share memories on the spot.

In summary, the Polaroid FLX-2602, FLX-3202, and FLX-3702 models cater to a wide spectrum of users, from beginners to professionals. With features encompassing high-resolution sensors, smart connectivity, customizable settings, and a nod to the classic instant photo appeal, the FLX series exemplifies Polaroid's commitment to bridging the gap between nostalgia and modern technology. Whether it’s a casual gathering or a professional shoot, the FLX cameras capture every moment with style and ease.