Chapter 2 Installing the LCD TV
Cable TV (CATV) Connection
The cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible. Use of this TV for other than private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcast/cable company, and/or program owner.
■A
■Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company. One possible method of connecting the coverter/descrambler provided by your cable TV company is shown in the diagram below.
ENGLISH
RF switch (not included)
| A |
O U T | IN |
| |
| B |
VHF/UHF IN
2 set signal |
| |
splitter | Cable TV Line | |
(not included) | ||
|
Cable TV converter/ descrambler
(not included)
■The RF switch (not included) is required to provide two inputs (A and B). Setting the RF switch to position A allows viewing of all unscrambled channels by using the TV channel keys.
■Setting the RF switch to position B allows viewing of all scrambled channels via the converter/descrambler by using the converter channel keys.
15