Polaroid PLA-4250A manual Safety Guidelines, Important Notice Concerning Power Cord Selection

Page 28

Safety Guidelines

CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.

CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country.

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION

The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed.

The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):

Figure A1

Figure A2

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your unit. Please consult the table below for the selection criteria for power cords used in the United States and Canada.

Cord Type

Size of Conductors in Cord

Maximum Current Rating of Unit

SJT

18 AWG

10 Amps

 

16 AWG

12 Amps

 

14 AWG

12 Amps

SVT

18 AWG

10 Amps

 

17 AWG

12 Amps

For service, support and warranty information, visit www.polaroidelectronics.com or in the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443.

“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for use on the MODEL # to Petters Consumer Brands, LLC.

28

Image 28 Contents
Operating Manual Contents Important Safeguards Avoid Image Sticking FCC Compliance StatementPackage Contents Getting StartedFront View of the Product Front Panel ControlRear View of the Product AudioCOMPONENT-1 COMPONENT-2AV-1 AV-2Remote Control MuteRemote Controls SwapInstallation Insert Remote Control BatteriesConnect audio and video cables to PC Important Make sure all devices are off before you beginPage Turn Power On Connect power cablesSelect Input Source OSD Functions Sub Menus PictureAudio Source Input Setup Source PIP / POP Setup Graphic TV Input MTSTV Parental Controls TV Rating Block UnblockClock Setup Specifications Other InformationTroubleshooting Cleaning the Display Safety Guidelines Important Notice Concerning Power Cord Selection
Related manuals
Manual 28 pages 52.03 Kb