Chapter 1 Introducing the LCD TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer to page17).
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Step1 Slide the back cover up to open the battery compartment of the remote control.
Step2 Insert two AAA size batteries.
Make sure to match the (+) and
(- ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc.) on the remote, as it may suffer damage.
Connect other an external A/V device (refer to page14-26).
Effective range
Your remote control can be activated from up to the LCD TV 5m away, if pointed directly in front of the device.
KF271 | 50. 5mm |
13. 8mm |
|
| 10mm |
丝 印430C |
|
30 O 
30 O 
5m
10