Special Features of the DVD Module
Your TV may have come equipped with an optional removable DVD player. The television is designed to allow simultaneous use of two different modules; the DVD player can be installed in three different positions. Please follow the procedures below to remove or install the DVD module.
Notes:
1.The television does not support simultaneous use of a DVD module and a hospitality VOD device or Enseo set top box.
2.Before removing or installing a modular device, ensure that the television is unplugged and turned off.
DVD module removal:
Refer to the illustration below and follow the procedures below to remove the DVD module from the unit:
Step 1: Open the back cover on the left rear panel of the unit.
Step 2: Remove the DVD module.
1.Loosen the screws on the DVD module.
2.Unplug the MGI connecting cord from the LCD TV.
3.Carefully slide the DVD module along the rails to fully remove the DVD module. Step 3: Close the back cover.
DVD module installation:
There are three different positions for installing the functional module and two MGI jacks for connecting the MGI connecting cord. Select one proper position for installing:
1.Plug one end of the MGI connecting cord into the DVD module.
2.Open the back cover on the left rear panel of the unit.
3.Carefully slide the module into the desired position and lock the function module with one screw.
4.Plug the other end of the MGI connecting cord into the MGI jack on the unit.
5.Close the back cover.