Magnavox 32MF301B Use your TV, Watching channels from an external device, Switching audio mode

4 Use your TV

Watching channels from an external device

1 Turn On a set-top box or the connected device.

The picture from your set-top box or the connected device might appear automatically on the TV screen.

If the picture does not appear

ECO

You can Turn On ECO mode to conserve power.

Press ECO once toTurn On ECO mode and reduce power consumption.

Press ECO again to Turn Off ECO mode.

ECO	On	ECO	Off
On	Reduces power consumption.
Off	Sets the backlight brighter.

Note

•You must set Home in Location ➠ p.10

Otherwise, the settings you adjusted will not be saved when the unit goes into standby mode.

	Press SOURCE repeatedly to select the set-top box or
	the connected device and wait a few seconds till the
2	picture appears.
	Use the remote control of the set-top box or the
	connected device to select channels to view.

Changing picture and sound settings

You must set Home in Location (refer to page 10).

Otherwise, personalized picture and sound settings will not be memorized after the unit goes into Standby mode.

English

Switching audio mode

	Digital TV operation
1	Press SAP to display the currently
		11.1
	selected language and the number of	English 1/3
2	available languages.
	Press SAP repeatedly to cycle through the available
	audio languages.

Changing picture settings

English

1 Press MENU and use ▲▼ to select Picture, then press

OK

Note

•Available languages differ depending on the broadcast.

•Other is displayed when the audio language cannot be acquired or the acquired languages are other than English, French or Spanish.

Analog/Cable TV operation

1	Press SAP to display the currently selected audio mode.
2	While receiving an MTS broadcast, press

Picture	Smart picture
Sound	Brightness

Setup Contrast

Features Color

Language Tint

Sharpness

Color temperature

Noise reduction

Personal

30

60

36

0

0

Normal

On

English

repeatedly to cycle through the available	11
audio channels.	SAP / STEREO

Sleep timer

Sleep timer can set the unit to go into Standby mode after an incremental period of time.

Press SLEEP repeatedly to change the

amount of time (increases the time by 30 Sleep 120min. minutes up to 120 minutes).

Press SLEEP once to call up the display for checking the remaining time.

•To cancel sleep timer, press SLEEP repeatedly until Sleep Off is displayed.

2 Use ▲▼ ◄► to select the item you want to adjust,
	then press OK
		to select the desired setting, then press OK
	Smart picture	(Personal Standard Sports Movie and Game)
		When you adjust the following settings,
		Personal will be set automatically.
			Curso	r	◄		Cursor	►
	Brightness	to decrease brightness				to increase brightness
	Contrast	to decrease contrast				to increase contrast
	Color	to decrease color				to increase color
		intensity				intensity
	Tint	to add red				to add green
	Sharpness	to soften				to sharpen
	Color	to select th
				e desired setting, then press OK
	temperature	(Warm Normal and Cool)
	Noise reduction	On		to reduce noise in an image
		Off		to set noise reduction to Off

7