Troubleshooting
The timer is not working.
The Clock/Timer setting is erased.
The remote control does not function.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan
✔Set the clock correctly.
✔Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.
✔Select the correct source (DISC or AUX for example) before pressing the function button.
✔Point the remote control at the remote sensor of the unit.
✔Reduce the distance to the player.
✔Remove any possible obstacles.
✔Replace the battery with new one.
✔Check that the battery is loaded correctly.
✔Place the DVD micro system as far away as possible from electrical devices (such as speakers,TV) that may be causing interference.
✔Check all speakers for correct polarity.
✔Check that the output of the video signal is switched to 'Ypbpr'.
English
37