ENGLISH
4.Use your TV
This section helps you perform basic TV operations.
4.1Switch your TV on/off or to standby
To switch the TV on
• Press . POWER at the right side of the TV.
4.2Watch TV
Switch channels
1.Press a number (1 to 999) or press CH+ or CH- on your remote control.
For digital channels, press a number (1 to 999) followed by a dot "." and then the corresponding sub channel number (1 to 999). Ex. 108.30.
2.Press PREV CH to return to the previously viewed TV channel.
CHANNEL
POWER
To switch to standby
•Press . on the remote control.
To switch on from standby without the remote control
•Press . POWER at the right side of the TV to switch the TV off.
•Press . POWER again to switch the TV on.
DNote
You can also switch channels by pressing CHANNEL - or + on the side controls of the TV.
Adjust volume
1.Press VOL+ or VOL- on your remote control.
2.Press MUTE on your remote control to mute the sound.
Press MUTE again or press VOLUME - or + to restore the sound.
To switch off
•Press . POWER at the right side of the TV.
DNote
Energy consumption contributes to air and water pollution. When the power cord is plugged in, your TV consumes energy. Your TV has a very low standby power consumption.
D Note: You can also adjust the volume by pressing VOLUME - or + on the side controls of the TV.
To increase the headphone volume, press the volume button on the TV or remote control.When headphones are plugged into the TV, the loud speakers are automatically muted.