Gefen GTV-HDMI-CAT5LR user manual Configuring the Extender for Hdmi Long Range, Distance Control

Page 12

CONFIGURING THE EXTENDER FOR HDMI LONG RANGE

The Extender for HDMI Long Range receiver has adjustment settings that may need to be made before an optimal video quality is achieved. The available adjustment options are listed below.

Distance Control

The Dip Switches related to distance control will allow the user to set the proper signal output for the length of CAT-5 cable used with the Extender for HDMI Long Range system. Please use the table below to set the proper setting:

Cable Length

Dip Switch Setting

Dip Switch 1

Dip Switch 2

 

0 - 165 Feet

OFF

OFF

166 - 330 Feet

ON

OFF

331 - 495 Feet

OFF

ON

496 - 820 Feet

ON

ON

NOTE: These length settings are guidelines. Actual settings may vary depending on the quality of cabling used. If there is no image after using the recommended settings above, please try the setting listed either below or above the one currently being used.

Equalization

The equalization Trim Pot will eliminate video noise that may be present in the video signal. Follow the steps below to adjust the equalization:

1.Locate the equalization Trim Pot on the front panel of the receiver and insert a small adjustment tool, such as a small flat headed screwdriver, into the hole.

2.Turn the Trim Pot in either a clockwise or counter-clockwise direction until the video noise is eliminated.

3.Remover the adjustment tool.

Gain (Brightness)

The gain Trim Pot will control the brightness level of the video signal. Follow the steps below to adjust the gain:

4.Locate the gain Trim Pot on the front panel of the receiver and insert a small adjustment tool, such as a small flat headed screwdriver, into the hole.

5.Turn the Trim Pot in either a clockwise or counter-clockwise direction until the desired brightness is achieved.

6.Remover the adjustment tool.

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Extender for Hdmi Long Range Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Introduction Gefen TVGefen TV Extender for Hdmi Long Range How It WorksOperation Notes Features Package IncludesSender Unit Panel Layout Front Panel Back PanelSender Unit Panel Descriptions Receiver Unit Panel Layout Distance Control Dip Switches Receiver Unit Panel DescriptionsHdmi Output Equalization Trim PotConnecting the Extender for Hdmi Long Range How to Connect the Extender for Hdmi Long RangeConfiguring the Extender for Hdmi Long Range Cable Length Dip Switch SettingDistance Control EqualizationNetwork Cable Wiring Diagram Pin ColorMounting Plate Installation Mounting Plate InstallationSpecifications

GTV-HDMI-CAT5LR specifications

The Gefen GTV-HDMI-CAT5LR is a highly efficient solution designed for transmitting HDMI signals over long distances using standard CAT5e or CAT6 cables. This technology addresses the common challenge of signal degradation that occurs when HDMI cables are extended beyond their typical reach. The Gefen GTV-HDMI-CAT5LR not only preserves the quality of HD video and audio but also simplifies installation for audiovisual systems.

One of the standout features of the GTV-HDMI-CAT5LR is its ability to extend HDMI signals up to 150 feet (45 meters) without compromising on image quality. This capability is made possible through its use of advanced signal processing technology, which ensures that both high-definition video and multi-channel audio are transmitted seamlessly. The unit supports resolutions up to 1080p, making it a perfect fit for modern home theaters, corporate AV setups, and other environments where high-quality video is a priority.

Another important characteristic of the Gefen GTV-HDMI-CAT5LR is its compatibility with a wide range of devices. It works flawlessly with Blu-ray players, gaming consoles, and set-top boxes, enabling users to enjoy a superior viewing experience from virtually any source. This versatility makes it an indispensable tool for those looking to enhance their home entertainment or professional presentation capabilities.

Installation of the GTV-HDMI-CAT5LR is straightforward, involving just a few simple connections. The unit consists of a transmitter and a receiver, both of which are easy to set up without the need for intricate configurations. The use of CAT5e or CAT6 cables, which are widely available and relatively inexpensive, makes this solution both cost-effective and practical for many users.

Additional features include support for 3D video and CEC (Consumer Electronics Control), enhancing user experience further. The device is also designed with robust build quality to withstand the demands of continuous operation, ensuring reliable performance over time.

In summary, the Gefen GTV-HDMI-CAT5LR is an outstanding solution for anyone needing to transmit HDMI signals over long distances. Its advanced technology, compatibility with diverse devices, and ease of installation make it an excellent choice for both consumer and professional applications. Whether for a home theater, corporate boardroom, or educational space, it delivers exceptional performance and reliability.
Top Page Image Contents