Use of the remote control
Note: Pressing most buttons once will activate the assigned function. Pressing a second time will
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after six seconds or press OK to remove immediately.
VOL 
/ 
Volume
Press 
or 
to adjust the volume.
OK
-to activate a setting
-to display the list of channels stored (according to the selecion made in the Installation mode (Antenna or Cable), p.13.
Color buttons
When functions attached to the color buttons, the color buttons are shown on screen.
MUTE
Interrupt the sound or restore it.
VIEW
To display a list of all channels marked as favorite (incl. subchannels).
Smart Sound button
Press repeatedly to select among the four settings; Personal, Speech, Music, Movies, or Multimedia.
Smart Picture button
Press repeatedly to select among Personal, Rich, Natural, Soft, Multimedia or Eco picture settings.
INFO button
Display information: Press to display (when available) information about the selected TV channel and program or accessory device.
POWER
Press to turn on/off the TV from or to standby mode.
Note: The TV is never powered off completely unless it is physically unplugged.
A/CH
Press to alternate between the currently viewed channel and the previously viewed channel.
AV
Press this button repeatedly to select AV1, AV2, AV3, HDMI1, SIDE or TV when in TV mode, according to where you connected the accessory devices (p. 27).
Type the dot for digital channels.
Channel selection
Note: You don’t have to start the installation again once you have searched for and stored the available TV channels.
MENU
Settings menu on/off, see p. 12.
To add or remove a channel in the favorite list of TV channels.
9