Software Upgrade Application
Please wait ...
Software Id: | ||||||
Loading |
|
|
|
|
| Done |
Validating |
|
|
|
|
| Done |
Programming |
|
|
|
|
|
|
Automatic software upgrade procedure
Power off your TV and remove all memory devices.
2Insert the USB portable memory (not supplied) that contains the downloaded software upgrade.
3Switch on your TV with the power switch 
at the right side of the TV.
4At startup the TV will scan the USB portable memory (not supplied) until it finds the update content. The TV will automatically go to the upgrade mode. After a few seconds it will display the status of the upgrade procedure.
Warning:
•You are not allowed to remove the USB portable memory (not supplied) during the software upgrade procedure!
•In case of a power drop during the upgrade procedure, don’t remove the USB portable memory (not supplied) from the TV.
The TV will continue the upgrade as soon as the power comes back.
•If you try to upgrade to a software version lower than the current version, a confirmation will be asked. Down grading to older software should only be done incase of real necessity.
•If an error occurs during the upgrade, you should retry the procedure or contact your dealer.
5When the software upgrade was successful, remove the USB portable memory (not supplied) and restart your TV with the power switch 
at the right side of the TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV software from your USB portable memory (not supplied).
Settings
Installation | Software upgrade |
Language | Current software info |
Autoprogram | Local upgrades/applications |
Weak channel installation |
|
Software upgrade |
|
Info
Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file in a directory called “Upgrades” located in the root of the USB portable memory (not supplied).
1Insert the portable memory (not supplied) that contains the down- loaded software upgrade.
2Select Software Upgrade in the Installation menu. Go to Local upgrades/applications. The TV will list all compatible images available on the USB portable memory (not supplied) and display the data for each selected upgrade image.
3Select the correct upgrade image and press the red color button to start the upgrade. Your TV will restart and will automatically go to the upgrade mode. After a few seconds it will display the status of the upgrade procedure.
Warning:
If you try to upgrade to a software version equal or lower than the current version, a confirmation will be asked. Downgrading to older software should only be done in case of real necessity.
4When the software upgrade was successful, remove the USB portable memory (not supplied) and restart your TV with the power switch 
at the right side of the TV. Your TV will start up with the new
software.
37