3
1 Connect the yellow VIDEO (VIDEO OUT) jack of the DVD Player to the corresponding VIDEO IN jack on your TV. Use the supplied video cable, which has yellow markings.
2 Connect the supplied audio cable to the red and white AUDIO OUT jacks on the DVD Player and to the left/right AUDIO IN jacks on the TV. Match the cable colors to the jack colors.
3 Plug the power cords of the DVD Player and the TV into an active power outlet. Press STANDBY-ON y on the front of the DVD Player to turn it on.
4 Turn on the TV. Set it to the correct Video In channel. See your TV owner’s manual for details. Or, go to your lowest TV channel (01 or 02) and change channels downward until you see the Player's blue DVD screen on the TV.
Hookups (cont’d) 11
Connecting to a TV Only
TV has a yellow Video In jack
Back of TV | 2 |
(example only) |
|
RIGHT AUDIO IN
LEFT AUDIO IN
1 VIDEO IN
Helpful Hints
• On the TV, the Video In jack is usually yellow and might be labeled video, CVBS, composite, or baseband.
• If your TV has a single Audio In jack instead of separate left/right Audio In jacks, you will need a different audio cable. You need a “splitter” audio cable to go from the AUDIO OUT jacks of the DVD Player to the single Audio In jack on your TV. See your electronics retailer for details.