Magnavox DP170MW8 Audio Setting, DRC Dynamic Range Control Default on, Down Sampling Default on

Follow steps 1 to 3 in the “CUSTOM menu” section on page 18 and step 4 on page 19.

5 PROGRESSIVE:		If “PROGRESSIVE” is “ON”,
	QUICK
(Default: OFF)		this message appears:
See note on the right.

Select “YES”.

Note:

PROGRESSIVE:

• You can set “PROGRESSIVE”

to “OFF” either in “DISPLAY”

TV ASPECT	4:3 LETTERBOX	4:3 LETTERBOX	SETUP
STILL MODE	AUTO	AUTO
PROGRESSIVE	OFF	ON
HDMI MODE	480p	480p

PROGRESSIVE MODE		AUTO 1	AUTO 1
FORMAT		RGB	RGB
RGB RANGE		NORMAL	NORMAL
		OK	If there is no picture or you
			do not press any buttons
			for 15 seconds, Progressive
6 To complete the			Scan will switch to “OFF”.
	“PROGRESSIVE”
	setting		Confirm again to use progressive scan.
			If Picture is good, Select “YES”.
		OK	NO
			YES
			SELECT: K / L SET:OK
C	AUDIO Setting

Before proceeding…

1.Make sure your TV has progressive scan.

2.Connect with component video cable

NOTE: If there is no picture or picture is distorted after selecting “YES”,

wait about 15 seconds for auto recovery.

Activate Progressive?		NO
		YES
SELECT: K / L	SET:OK

Select “YES”.

or

or

OK

menu or by pressing and

holding [PLAY B] on the

front of the unit for more

than 5 seconds.

• When “PROGRESSIVE” is

“ON”, video signals from

VIDEO OUT and S-VIDEO OUT

jacks will be distorted or not

be output at all.

Choose the appropriate audio setting for your device. It only affects during the playback of DVD. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 18.

DVD	4 Select the desired item.
FUNCTIONS	or
	AUDIO menu
	AUDIO
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
	HDMI AUDIO	ON
	OK
	Note:

•In “QUICK” menu, “PLAYER MENU”, “TV ASPECT”,

“PROGRESSIVE” “HDMI MODE” or “DOLBY DIGITAL” are available. “QUICK” menu consists of the setting menu frequently used, and they are accompanied with QUICK

. You can make all settings in “CUSTOM” menu.

5DRC (Dynamic Range Control): (Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC	ON		OFF
DOWN SAMPLING	ON		ON
DOLBY DIGITAL	BITSTREAM		BITSTREAM
HDMI AUDIO	ON	OK	ON

DOWN SAMPLING: (Default: ON)

Set to “ON” when outputting in 48kHz.

Set to “OFF” when outputting the original sound.

DRC	ON	ON
DOWN SAMPLING	ON	OFF
DOLBY DIGITAL	BITSTREAM	BITSTREAM
HDMI AUDIO	ON	ON

OK

DOLBY DIGITAL: QUICK

(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.

•BITSTREAM: outputs Dolby Digital signals.

•PCM: converts the Dolby Digital into PCM (2 channel).

DRC	ON	ON
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM	PCM
HDMI AUDIO	ON	ON

OK

HDMI AUDIO: (Default: ON)

This function is only available when you use an HDMI connection.

•ON: to output the HDMI sound.

•OFF: not to output the HDMI sound.

DRC	ON	ON
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM	BITSTREAM
HDMI AUDIO	ON	OFF

6To exit the menu

SETUP

Note:

DRC:

•This function is available only on the discs which are recorded in the Dolby Digital format.

DOWN SAMPLING:

•When playing back a 96kHz disc with the copyright protection, or when virtual surround is set to “1” or “2”, the sound will be down sampled at 48kHz even if the “DOWN SAMPLING” is set to “OFF”.

•When the HDMI sound can be output, the setting change cannot be done.

•This function is available only on digital outputting of a disc recorded in 96kHz.

HDMI AUDIO:

•When the HDMI sound cannot be output the setting change cannot be done.

OK

– 20 –

EN