Settings
Setup | Clock |
Preferences | Auto clock mode |
Source | Auto clock channel |
Clock | Time |
| Day |
| Time zone |
| Daylight saving |
Info |
|
Most TV channels do not transmit clock information. A few cable channels do, but they are at the end of the channel ring. Antenna channels do not transmit clock information.
If clock information does not appear, you can assume that either clock extraction is taking a long time or that there is no clock.
Clock
This allows you to use your TV as a clock.
Note: Adjusting the clock is necessary for the correct operation of Lock after (See TV settings, Channels, p. 25) features.
Auto clock mode
1Select Clock in the Setup menu.
2Press the cursor right key to select the Auto clock mode.
3Press the cursor right key to instruct the TV to get the time automatically or manually.
Auto clock channel (only available when Auto clock mode is set to Automatic)
With the cursor buttons, select the channel number where time can be found by the TV. Typically time can be found on PBS as well as some other channels.
Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu item can not be selected.
Time - Day (only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day. If Auto clock mode Manual has been selected, and no clock search has been done, the system will keep the entered time and day.
Time zone (only available when Auto clock mode is set to Automatic)
1This function allows you to select your local time zone.
2Broadcasted time information will correct the clock display for your local time.
Select Time zone with the cursor down.
Press the cursor right to select your local time zone.
Daylight saving (only available when Auto clock mode is set to Automatic)
| Daylight saving time is automatically set by specially |
| broadcasted signals. This menu item allows you to disable the |
| automatic setting of daylight saving time. This is useful if you live |
| in an area or state where daylight saving is not applied, but you |
| receive channels from other areas where daylight saving signals are |
| broadcasted. |
1 | Select Daylight saving with the cursor down. |
2 | Press the cursor right key to select Automatic for automatic |
clock correction for daylight saving time, based on specially broad- casted signals.
3Select Off to disable automatic clock correction based on the spe- cially broadcasted signals.
20