Magnavox 20MS334R owner manual Basic Antenna Connection, Basic Cable TV Connection

Page 7

BASIC ANTENNA CONNECTION

Acombination antenna receives normal broadcast channels (VHF 2–13 and

UHF 14–69).Your connection is easy because there is only one 75Ω (ohm) antenna jack on the back of your TV, and that’s where the antenna goes.

Outdoor or Indoor Antenna

(Combination VHF/UHF)

1 If your antenna has a round cable

(75 ohm) on the end, then you're ready to connect it to the TV.

If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75-ohm adapter.

2 Connect the antenna (or adapter) to the 75Ω (ohm) jack on the back of the TV. If the end of the antenna wire is threaded, screw it down finger tight.

	1
Twin-lead	2
wire to	2
300-75Ω

adapter

OR

	75Ω jack on rear
Antenna	of Television

with 75Ω cable

BASIC CABLE TV CONNECTION

Your Cable TV signal into your home may be a single, 75Ω (ohm) cable. If so, this connection

is very simple. Follow the step below to connect your Cable TV signal to your new television.

1 Connect the Cable TV signal to the 75Ω jack on the TV. Screw it down fin- ger tight.

Cable TV signal from

Cable Company

(75Ω coaxial cable)

1

75Ω jack on rear

of Television

HELPFUL HINT

Use Auto Program as described on page 12 to set up channels that are available in your area. Use the CH +/– buttons to scan avail- able channels.

7

Image 7

Contents 20MS334R Registering your product within 10 days Magnavox warranty Qualify for as the owner of your modelModel No Serial No Important Safety Instructions Contents Press Channel 5 or to select TV channels Basic TV and Remote Control OperationsRemove the battery compart Reattach the battery compart- ment lidRemote Control Basic Cable TV Connection Basic Antenna ConnectionIf your antenna has a round cable BOX Connections CableLeft and right sound channels AUDIO/VIDEO in JacksAudio cables usually red and white to TV will receive sound from Other equipment in stereo fromMenu Language Press 3 to see the Install menu Press 5 or to select LANPress Menu to see the menu Press 5 or to highlight Press 3 to see the Install menu Tuner ModePress 5 or to select Install Auto Program Setting UP ChannelsPress Menu to see the menu Channel Edit Press 3 to see the Install menu Press 5 or to choosePress 5 or to select Picture Picture AdjustmentsAVL Automatic Volume Leveler Sound AdjustmentsSmartLock AutoLock processes program SmartlockIf Incorrect appears, enter 0711 again Smartlock Access CodePress 5 or to select Features Press 3 to see the Features menuSmartlock Block Channels Enter your Access Code to view a blocked channelPress Menu to see the menu Press 5 or to select Smartlock Clear ALL Smartlock Block ALL Access CodeEnter your Access Code to View a blocked channelPress 5 or to select Movie RAT- Ings Smartlock Movie RatingsPress 3 to see the TV Ratings Smartlock TV Ratings13Press STATUS/EXIT to remove the menu Smartlock Blocking Options Press 3 to enter the Features menu10Press STATUS/EXIT to remove the menu Press 5 or to select Timer ClockTV will turn off Sleep TimerWill appear on the screen Press Sleep repeatedly to pickClosed Captions Press CC to see the current Closed Caption settingSmartpicture Smartsound Theatre Use when watching moviesPress Surf while the channel num- ber appears SmartsurfCare and Cleaning TroubleshootingGlossary Au Canada CanadaEn el Canadá San Jose, CA Euless,TX Philips Factory ServiceFranklin Road., Suite F Keynote Circle Marietta, GA Brooklyn Heights, OH Itasca, ILSmartLock AutoLock IndexVideo In jack Page Limited Warranty