Magnavox 23MT2336/17 manual Basic Antenna Connection

Basic Antenna Connection

A combination antenna receives normal broadcasting channels (VHF2-13 and UHF 14-69). Your connection is easy since you will connect the antenna to the 75OHM ANTENNA INPUT jack on the rear of the TV.

If your antenna has a round cable (75 ohm) on the end, then you are ready to connect it to the TV. Go to step 2.

If your antenna has flat twin-lead wire

(300 ohm), you first need to attach the antenna wire to the screws on a 300 to 75 ohm adapter (not supplied with TV).

Push the round end of the adapter or antenna cable onto the 75 OHM ANTE- NNA INPUT jack on the rear of the TV. If the round end of the antenna cable is threaded, screw it down finger tight.

Note: this TV has no hand grip, which is a recess at either side of the cabinet for ease of transportation of bigger sets.

75OHM

ANTENNA

INPUT

Plug the TV s power cord into a power
outlet and turn on the TV. Set TV/CATV	OR

to CATV as detailed on page 11.

Refer to AUTO SEARCH to set up your available channels. Details are on page 12.

If you have separate UHF and VHF antennas, you need an optional combiner to connect to the TV.

UHFAntennaUHF/VHF

Combiner

VHF Antenna

Rear of TV

75-300 Ohm Adapter

VHFAntenna

6