Magnavox 27MS4504 user manual Troubleshooting

Page 32

28

TROUBLESHOOTING

No Power

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again.

•Check that the outlet is not on a wall switch.

•Be sure the fuse is not blown on the AC power strip, if one is being used.

No Picture

•Check antenna connections. Are they properly secured to the TV's ANT 75Ω plug?

•Check the TUNER MODE control for the correct tuner setting.

•Try running the Auto Program feature to find all available channels.

•Press the CH+ or CH- buttons on the remote to make sure the correct signal source is selected (FRONT or Current Channel).

No Sound

•Check the VOLUME buttons.

•Check the MUTE button on the remote control.

•If you’re attempting to hook up auxiliary equipment, check the audio jack connec- tions located on the front of the TV.

Remote Does Not Work

•Check the batteries. If necessary, replace them with 2 AA Heavy Duty (Zinc Chloride) or Alkaline batteries.

•Clean the remote control and the remote control sensor window on the TV. •Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again.

•Be sure the fuse is not blown on the AC power strip, if one is being used.

•Check to be sure the TV outlet is not on a wall switch.

TV Displays Wrong Channel or No Channels Above 13

•Repeat channel selection.

•Add the desired channel numbers (using the CHANNEL EDIT control) into the TV’s memory.

•Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available chan- nels.

Image 32

Contents 27MS4504R Warranty Right to maximum protection Verification of ownershipUnder the terms and condi Event of product theft or Tions of your Magnavox LossImportant Safety Instructions Panel Layout Panel IndexSubject Panel No Audio/Video ConnectionsIf your antenna has a flat Twin-lead wire 300 ohm, you Basic Antenna ConnectionsBasic Cable TV Connections Ohm adapterCable BOX Connections Cable Box w/RF In/OutputsThis connection will be mono Cable Box w/Audio/Video OutputsBasic TV and Remote Control Operation 7Reattach the battery lidOr Down button to select TV channels Up correctly inside of case is markedUsing the AV1 in or AV2 in Input Jacks AV1Using the S-VIDEO Input Jacks 4Press the CH + or CH- buttonsUsing the CVI Component Video Input Jacks 3Turn the TV and the DVD or digital accessory device onUsing the Monitor Output Jacks For Audio System ConnectionSide A/V Input Connection Change channels down to find Correct source channelDescription of Remote Control Buttons Description of Remote Control Buttons CONT’D Press the Cursor Right HOW to USE the Language Control button to display the Install menu features HOW to USE the Tuner Mode Control button to select either ANTENNA, CABLE, or Auto modeHOW to Automatically Program TV When Cable is selected, channels 1-125 are availableHOW to ADD or Delete Channels Nels stored in the TV’s memoryHOW to USE the Picture Adjustment Controls DNRHOW to USE the Sound Adjustment Controls Sound Bass Boost Features BalanceHOW to USE the Format Control Expand Understanding the Smartlock Controls Movie RatingsSetting UP a Smartlock Access Code HOW to Block Channels Block Channel OnBlocking or Clearing ALL Channels AT the Same Time Press the Cursor UP 5or Down buttons to selectEither Clear ALL or Block ALL If Clear ALL is selected, press the Cursor RightBlocking Programs Based on Movie Ratings Blocking Programs Based on TV Ratings Some models refer to SmartLock asButtons on the remote When OFF, ALL blocking is disabledOther Smartlock Blocking Options HOW to USE the Closed Caption Controls Setting the Sleeptimer ControlPress the Smart Picture Using the Smartpicture ControlUsing the Smartsound Control Alternate Channel Troubleshooting Care and Cleaning DVD menus-listings of DVD disk contentFactory Service Locations Atlanta Limited Warranty Magnavox, P.O. Box 520890, Miami, FL 33152 402