Sony STR-DE815G About the color system for video input, Understanding How the Receiver Works

Page 4

Welcome!

Thank you for purchasing the STR-DE1015G, STR- DE815G or STR-D760Z Sony FM Stereo/FM-AM Receiver.

Your new receiver is an audio/video control center with a unique interface. When you connect the receiver to your TV, an on-screen display (shown below) appears and lets you operate the various connected audio/video components with this receiver’s remote.

Also, the on-screen display lets you control any other device that can be controlled by an infrared remote control, such as air conditioners.

About the color system for video input

This unit is compatible with the following color systems.

USA and Canadian model :

NTSC

Australian model :

PAL*

Singaporean model :

PAL*

Other countries :

NTSC

*Although the normal OSD is displayed in color, when video signals are input from other components the OSD is displayed in black and white.

Understanding How the Receiver Works

1The remote emits an infrared (IR) signal when you press direction control button (see 1 below).

2This controls the movement of the pointer (hand- shaped icon) in the on-screen display (see 2 below).

3When you move the pointer to an on-screen icon, and press the center of the direction control button on the remote, the infrared (IR) emitter on the front panel transmits the corresponding IR control code to the respective component (see 3 below).

LD player, etc.

Video signal

Video signal

 

Video signal (Input from source

 

components combined with on-screen

IR control codes

display)

 

IR emitter

IR receptor

STR-DE1015G

 

SOUND

 

SETUP

FUNCTION

 

 

3

 

å 2

 

 

 

M

m

 

 

 

 

 

µ

 

 

 

 

 

INPUT

SUB

USER

 

0

(

)

p

P

=

+

TV (monitor)

VCR, etc.

1

 

￿

￿

¢

¢

¢

¢

Ḡ¹

-±

¼â

For USA

and Canada

(RM-H501)

For other countries (RM-VR101)

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents FM Stereo FM-AM Receiver Precautions Table of contents About This ManualAbout the color system for video input Understanding How the Receiver WorksAustralian model Singaporean modelHookup Overview STR-DE1015GInfrared IR Repeater Hookups TV/VCR Hookups Singaporean modelBefore you get started STR-DE815G and STR-D760ZInfrared IR Repeater Hookups Connecting an outdoor antennaAntenna Hookups Audio Component Hookups Speaker placement for STR-DE1015G Speaker System HookupsSelecting the speaker system Speaker placement for STR-DE815G and STR-D760ZSelecting the impedance except for Singaporian models TV-VCR Hookups STR-DE815G and STR-DE760ZWhat cables will I need? Monitor to TV or monitorLD/DVD to LD or DVD player Video 3 Input to a video camera or a video gameOnly Dolby Digital AC-3 decoder etcLD/DVD in AC-3 RF to LD player CD in Optical to CD playerLD/DVD in Optical to DVD player DAT/MD Inoutoptical to DAT or MD deckConnecting the AC power cord Before using for the first timeSwitched AC OUTLETs To a wall outlet AC HookupsUsing the Remote Battery lifeInserting batteries into the remote USA and Canada Inserting batteries into the remote other countriesHow to use the remote To make the on-screen display disappearBlank Pointer Area For USA and CanadaIR code registration is unnecessary Registering a TV or MonitorFollowing case Erasing TV IR codes Registering Audio and Video Components IR code registration is unnecessary in the following caseRegistering IR codes Receiver jacks Component to be connectedClick the manufacturer of the component you Click the respective componentIR sensor Audio/video components remote Erasing IR codes To erase all the IR codesSpecifying the speaker type Adjusting the speaker volume Specifying the center mode Wide modeNormal mode Phantom modeYou can increase the output level of the rear speakers To listen to or watch Click Selecting a ComponentControl buttons To turn off the selected component To turn off all componentsTo mute the sound To listen to digital program sources STR-DE1015GWatching TV or Video Programs Tuning and Presetting Radio Stations Tuning radio stations by scanning stations Automatic TuningPresetting the radio stations Tuning preset stations Preset TuningTo change a preset station To recall preset stations from the SUB menuRecording Recording to audio tape or MDTo stop recording To control the recorder after recordingRecording other components to video tape Recording TV programs to video tapeUsing the Pre-programmed Sound Fields Sound fields for STR-DE1015G Genre Mode Surround effectIll. a Virtual Enhanced Surround a For Rear SP BehindIll. C Virtual Rear Shift For Rear SP SideGenre Mode Surround effect Sound fields for STR-DE815G and STR-D760ZWhen playing a source encoded with discrete information Selecting the sound fieldsWhile playing a component, click Sound in the main menu To turn off the sound fieldsAdjustable sound parameters for Customizing the Sound FieldsAdjusting the equalizer parameter STR-DE1015G To start adjustment with a flat equalizer curveClick EQ Repeat steps 4 and 5 as necessaryAdjusting the delay time STR-DE1015G To reset the equalizer to the factory settingsTo reset the tone to the factory settings Click Setup in the main menu, then click DelayAdjusting surround sound parameters except for delay time Click DelayClick Short or Long to adjust the delay time To reset the delay time to the factory settingsReverberation time Reverb Low Frequency Extension LFE mix level OtherDynamic range compression ratio Other Test tone TestSpace bar To register a specific IR codeIR sensor Your components remote Click Code Clear in the User IR Code Setting menu IndexingTo erase all the User IR codes IconsTo cancel the Auto Start function Starting a Component Automatically at Power On Auto StartClick Auto Play on or OFF Setting the sequence of IR codes Starting a Macro PlayClick Macro 1 or To erase an entered IR codeChanging the Display Settings Adjusting the Sensitivity of the RemoteSelecting the display parameters Adjusting the position of the on-screen display Using the Sleep Timer Operating a CD ChangerSleep appears in the upper left corner of the main menu You can also freely specify the timeIndexing a CD Grouping CDsTo remove the CD from one or more groups You can assign the CD to one or more groupSearching for a CD quickly Playback starts automaticallyFront Panel Descriptions @£@ª@Á@¼ !»!¥!!¤!!¢TV switches TV’s input mode Flasher Remote DescriptionsUSA and Canada Other countriesWhen you listen with headphones Playing audio and video components at the same timeTo listen to or watch Select Do ThisTuning Radio Stations To listen to or watch PressIf the component does not turn on To turn off the componentsAdjusting the Sound To adjust the equalizer parameters STR-DE1015GDigital Recording STR-DE1015G only To select the sound fieldsTo adjust the surround sound parameters Surround SUR parameters STR-DE1015GCustomizing the Receiver Operations Surround SUR parameters STR-DE815G / STR-D760ZSet up parameters STR-DE1015G Set up parameters STR-DE815G / D760Z Center modeControl A1 mode To switch the displayComponent Operations To temporarily cancel the Flasher functionTo select another component Troubleshooting Severe hum or noise is heard No sound is heard from the center speakerSTR-DE815G / D760Z Select a sound field Surround effect cannot be obtainedAudio power specifications Digital signal processor section STR-DE1015G onlyCD3 FM tuner section Video sectionGeneral AM tuner sectionGlossary Page Page Index Watching TV Video programs 28 Wide modeY, Z

STR-DE1015G, STR-DE815G, STR-D760Z, STR-D760Z, STR-DE815G specifications

The Sony STR-DE815G, STR-D760Z, and STR-DE1015G are distinguished audio/video receivers that offer exceptional performance and functionality for home theater enthusiasts. Each model features state-of-the-art technology, making them suitable for a variety of audio setups.

The STR-DE815G is designed for those who appreciate clean, powerful audio output. It boasts a robust power output of 100 watts per channel and supports a wide range of sound formats, enhancing the listening experience for music, movies, and gaming. The receiver also includes an FM/AM tuner, enabling users to enjoy their favorite radio stations in high quality. The integration of Dolby Pro Logic and DTS surround sound makes it possible to immerse listeners in a multidimensional audio experience.

Moving on to the STR-D760Z, this model incorporates sophisticated digital signal processing technology. With 5.1 channel surround sound capabilities, it provides an encompassing audio field perfect for movie nights or gaming marathons. The STR-D760Z features a variety of sound modes that can be tailored to suit different types of content, ensuring optimal sound quality. Additionally, its multiple inputs, including optical and coaxial, allow for versatile connection options with various devices, from DVD players to gaming consoles.

Finally, the STR-DE1015G showcases a blend of modern aesthetics and user-friendly functionality. It delivers a powerful audio performance, boasting 100 watts per channel. One of its standout features is the built-in virtual surround sound technology, which allows users to enjoy an immersive experience without the need for multiple speakers. With various surround modes and equalization options, users can customize their audio experience to match their personal preferences.

Each of these Sony receivers demonstrates a commitment to high-quality audio reproduction, showcasing features that include advanced tuning capabilities, sleek designs, and durability. Whether for music listening, watching movies, or gaming, the STR-DE815G, STR-D760Z, and STR-DE1015G represent the best of home audio solutions, making them a valuable addition to any entertainment setup. As the demand for high-fidelity sound continues to rise, these models remain relevant, offering rich soundscapes and versatility for the discerning audiophile.
Top Page Image Contents