Panel Descriptions

1 - Power On LED

When this is lit, the Home Theater Scaler Pro is powered up.

2 - I/R Sensor Port

Point the remote at this port to control the Home Theater Scaler Pro

3 - Video Signal LED When this is lit, video is passing through the system.

4 - Component Signal LED When this is lit, component audio is passing through the system.

5 - HDMI - 1 Signal LED When this is lit, HDMI Channel 1 is passing through the system.

6 - HDMI - 2 Signal LED When this is lit, HDMI Channel 2 is passing through the system.

7 - Power On/Off Switch This is the main power switch for the unit.

8 - Composite Right Audio Use this jack to input right channel composite audio.

9 - Composite Left Audio Use this jack to input left channel composite audio.

10 - Composite Video Use this jack to input composite video.

11 - S-Video Input

Use this jack to input S-Video.

12 - Component Right Audio Use this jack to input right channel component audio.

13 - Component Left Audio Use this jack to input left channel component audio.

14, 15, 16 - Component Video Channel Jacks

Use these jacks to input Component RGB.

Use this jack to update Firmware.

18 - S/PDIF Channel 1 Input Jack Use this jack to input S/PDIF Audio Channel 1..

19 - TOSLINK Input Jack

Use this jack to input Toslink Audio.

20 - HDMI 1 Input Jack

Use this jack to input HDMI Channel 1

Screw-down HDMI jacks attach here.

22 - S/PDIF Channel 2 Input Jack Use this jack to input S/PDIF audio Channel 2.

23 - HDMI 1 Input Jack

Use this jack to input HDMI Channel 1

24 - Screw-Locking Point Screw-down HDMI jacks attach here.

25 - HDMI 1 Input Jack

Use this jack to input HDMI Channel 1

26 - Screw-Locking Point Screw-down HDMI jacks attach here.

27 - TOSLINK Output

Use this jack to output TOSLINK Audio

28 - HDMI 1 Output Jack

Use this jack to output HDMI Channel 1

29 - Screw-Locking Point

Screw-down HDMI jacks attach here.

30 - 5VDC Power In Jack

Plug power jack in here.