Model
Names and Functions
WORD IN terminal switch
This must be switched ON when the external WORD clock is input.
ANALOG INPUT MODE switch
This switch is used to select the channel to which the ADAT output should be assigned for the signal input to the ANALOG INPUT jack. This switch will be active only when the DIGITAL MODE switch is set to ADAT. Refer to pages 6 and 7 for details.
POWER switch/POWER LED
AC power to the
|
|
|
|
| ADAT/ANALOG CONVERTER |
|
|
|
| |
|
|
|
|
|
|
|
| OPTICAL | ||
| CLOCK |
|
| ANALOG INPUT MODE | DIGITAL MODE |
| POWER | |||
| 75 | WORD |
|
|
|
|
|
|
| |
ON | OFF | OPTICAL | INT(44.1k) | ADAT | S/P DIF | STBY | ON | |||
LOCKED
LOCKED LED
This indicates status of the operating clock selected by the CLOCK selector switch. Refer to page 6 for details.
CLOCK selector switch
The
DIGITAL MODE selector switch
The DIGITAL MODE IN/OUT formats (ADAT or S/P DIF) is selected by this switch.
Refer to page 6 for details.
ANALOG INPUT connectors (1-8)
These are connected to BUS OUT (or GROUP OUT) of the analog mixer. Refer to pages 5 and 7 for details.
DIGITAL INPUT/OUTPUT connectors
There are connected to the VR800 digital multitrack recorder or to the DIGITAL IN/OUT connectors of a digital recorder provided only with digital in/ out connectors.
8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | IN | OUT |
IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
OUT |
|
|
|
|
|
|
|
| OPTICAL |
12V |
|
|
|
|
|
|
|
|
|
8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
|
|
DC IN |
|
|
| ANALOG |
|
| WORD IN |
| DIGITAL |
DC IN jack (Center: Plus +)
The AC adaptor
ANALOG OUTPUT connectors (1-8)
These are connected to the TAPE INPUT jacks of the analog mixer. Refer to pages 5 and 7 for details.
WORD IN connector (BNC)
The external WORD clock signal is input here.
Refer to page 5 for details.
4