DIP SWITCH FEATURES
The 3GSDI to HDMI 1.3 Converter has a series of DIP switches that will allow manual configuration of the HDMI’s output video signal. There is also a DIP switch to display a test pattern through the HDMI output. Please see the next page for DIP switch features and operation.
Switch | Description | OFF | On | |
(Factory Default) | ||||
|
|
| ||
1 | Test pattern | Off | On | |
2 | EDID | Auto | Manual | |
3 | HDMI Out | 4:4:4 | 4:2:2 | |
Sampling | ||||
|
|
| ||
4 | HDMI Out Color | RGB | YCbCr | |
Space | ||||
|
|
| ||
5 | HDMI Out RGB | Limited | Full | |
Range | ||||
|
|
| ||
6 | HDMI Out Deep- | Off | Deep | |
Color | ||||
|
|
| ||
7 | HDMI Out Bit | 12b | 10b | |
Depth | ||||
|
|
| ||
8 | Spare Unused | N/A | N/A |
1The color bar test pattern is in 720p (60Hz) format. No valid input is necessary at the SDI connector to use the test pattern.
2When this switch is turned OFF (Auto), the HDMI output is configured according to what is reported inside the HDMI sink EDID connected to the mini converter. When turned ON(Manual), the switches 3 to 7 are used instead for the configuration of the HDMI link.
9