Gefen 4x4 HDTV Matrix user manual Introduction, Operation Notes

Page 4

INTRODUCTION

Thank you for purchasing the 4x4 HDTV Matrix.

The 4x4 HDTV Matrix switches four HDTV sources to any four DVI displays.

The 4x4 HDTV Matrix switcher has four DVI inputs and four DVI outputs. Matrix input #1 and the DVI port of HDTV source #1 connects using a male to male DVI cable. The DVI port of HDTV source #2 connects to DVI input #2. The DVI port of HDTV source #3 connects to DVI input #3. The DVI port of HDTV source #4 connects to DVI input #4. There are four (4) DVI outputs connecting to four (4) different displays.

Note: The switching is done by using either the the RMT-16-IR remote control or through the RS232 port. The 4x4 HDTV Matrix is rack mountable.

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING

OR OPERATING THE 4X4 HDTV MATRIX

The 4x4 HDTV Matrix is housed in a metal box for better RF shielding.

The 4x4 HDTV Matrix works with all DVI and HDMI displays.

The 4x4 HDTV Matrix supports both AUDIO and VIDEO signals.

The 4x4 HDTV Matrix is fully HDCP compliant.

1

Image 4
Contents 4x4 Hdtv Matrix Asking for Assistance Technical SupportTechnical Support Hours Write ToTable of Contents Introduction Operation NotesFeatures FeaturesIncludes Front Panel Panel LayoutUsing the 4X4 Hdtv Matrix RMT16-IR Installation DIP Switch Guidelines How to open the 4x4 Hdtv MatrixIR Codes RS-232 Interface RS232 SettingsBinary Table 4x4 Hdtv Matrix Rack Mount Diagram Specifications Terminology DDCWarranty