Gefen GTV-HDMI-1080PS user manual Connecting and Operating the 1080P Hdmi Scaler

CONNECTING AND OPERATING THE 1080P HDMI SCALER

How to Connect the 1080p HDMI Scaler

1.Connect the HDMI source to the 1080p HDMI Scaler using the supplied HDMI cable.

2.Connect an optional external audio source to either the TOSLINK digital audio input or the stereo mini-jack input using user supplied cables.

NOTE1: The 1080p HDMI Scaler will cross convert between some digital and audio formats. All audio outputs (HDMI, digital TOSLINK, and analog stereo mini-jack) will be active. The 1080p HDMI Scaler will not, however, down-mix multi-channel audio formats to 2 channel analog stereo. Please see the chart below to see if audio will be heard out of a particular output based on the audio input format.

INPUT ►	HDMI	HDMI	HDMI	TOSLINK	TOSLINK	ANALOG
	MULTICHANNEL	2 CHANNEL	DOLBY DIGITAL	2 CHANNEL	DOLBY DIGITAL	STEREO
OUTPUT ▼
	LPCM	LPCM	& DTS	LPCM	& DTS	2 CHANNEL
HDMI	YES	YES	YES	YES	YES	YES
	*2 CHANNEL
TOSLINK	YES	YES	YES	YES	YES	YES
	*2 CHANNEL
ANALOG
STEREO	NO	YES	NO	YES	NO	YES
MINI-JACK

*2 channels are the front right and front left speakers. It will not down-mix multi-channel to 2 channel audio

3.Connect the HDMI output on the 1080p HDMI Scaler to the display using the supplied HDMI cable.

4.Connect either the TOSLINK digital audio output or the stereo mini-jack analog output to the display or external audio processor using user supplied cables.

5.Plug the 5V DC power supply into the 1080p HDMI Scaler.

6.Power on the display first, then the source.

OPERATING THE 1080P HDMI SCALER

The 1080p HDMI Scaler has a built in GUI for navigating the various functions. The GUI is navigated by the front panel buttons or the optional RMT-SR-IR remote control (sold separately).

5