Gefen EXT-DVI-144DL user manual RS-232 Control, Default Serial Port Settings

RS-232 CONTROL

Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication.

5 4 3 2 1 1 2 3 4 5

9 8 7 6 6 7 8 9

Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface

	Default Serial Port Settings
Bits per second	............................................................................................ 19200
Data bits	8
Parity	None
Stop bits	1
Flow Control	None

IMPORTANT: When sending RS-232 commands, a carriage return and a line feed character must be included at the end of each line.

NOTE: Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication. A null-modem adapter should not be used with this product.

9