RECEIVER UNIT DESCRIPTIONS
1RS-232 Output Port
Connect a controlling device to this port.
2Locking HDMI Output Port
Connect a HDTV display to this HDMI port
3IR Window
Receives signals from the Hi-Def source IR remote control unit. The IR signals are sent back to the source device, when using an IR Blaster.
4Calibration Indicator
This LED will alternate from red to green during the calibration procedure. The LED will turn solid green once the calibration procedure has been completed.
5Power Indicator
This two-color LED will turn bright red once the included 5V DC locking power supply has been properly connected to the unit and the locking power supply has been connected to an available wall outlet. This LED will turn bright green once the Sender unit and Receiver unit are communicating correctly.
65V DC Locking Power Connector
Connect the included 5V DC Locking Power Supply to this receptacle.
7IR Extender Port
Connect an IR Extender cable (Gefen part # EXT-RMT-EXTIR) to this port.
8Fiber Optic Connector (SC-Type)
This connector accepts 1 strand of SC-terminated fiber optic cable that will link the Sender Unit and Receiver Unit together. The Gefen Extender for HDMI 1.3 Over One Fiber with IR will only accept multi-mode fiber optic cabling.
