Setup menu (continued)
Event – Event Status
The “Event Status” menu indicates the status of all possible events:
●Grey text: Event detection not enabled
●White text: Event detection enabled
●Flashing border: Message – acute event for 5 sec
●Yellow field: Pending event
Setup Menu...
Term
Event | Event Status |
Event
At alarm input 1 to 16
Event Status
Check | Error detected at one of alarm inputs 1 to 16 | |
Motion | Motion detected on camera 1 to 16 | |
Video Loss | Video loss on camera 1 to 16 | |
|
| |
Text input on text input device 1 to 16 | ||
|
| |
Panic Record | Panic recording | |
|
| |
Check Recording | On checking the recording | |
|
| |
Disk Almost Full | On checking the data medium (only if DVR is not operating in Overwrite | |
mode) | ||
| ||
Disk Full | On checking the data medium (only if DVR is not operating in Overwrite | |
mode) | ||
|
Setup Menu...
Term
Event
Meaning
Event Status
Storage
Type | Memory type |
|
|
Disk Bad | Data carrier status |
|
|
Temperature | Data carrier status |
S.M.A.R.T. | Result of S.M.A.R.T. check |
57 |