Parts List for Insta-RP Series

Please make sure all parts listed below are included before proceeding with the installation.

Parts List

a.Insta-RP Screen Material

b.Microfiber cleaning cloth

c.Scraper

QTY 1 1

Caution Notes:

1.This product is an adhesive rear‐projection screen that can be applied to various surfaces such as transparent glass or acrylic.

2.This product is made for one‐time permanent application. It has a non‐reusable adhesive film that bonds firmly to a window surface. If the surface has any layer treatment such as tinting, it is likely that the layering will be damaged upon removal of the material.

3.To ensure an even and “bubble –free” installation. Make sure that the window surface is clean and evenly moistened previous to the installation.

4.Do not fold the Insta‐RP material. Folding will result in a permanent crease that cannot be removed.

5.Avoid touching the material with any hard or sharp objects that may cut scratch or otherwise deface the screen.

6.The Insta‐RP material is applied to a moist surface. This can impact the installation of the material by possibly creating slight ripples or bubbles. These will disappear within the first few weeks as the micro‐droplets of water trapped in the adhesive evaporate.

Rev.022111‐AS