Video Projection Interface

Connection pins

inside of case

1. 12V Trigger: 12V trigger for your new Elite Home2

-----allows your screen to synchronize its drop and rise

with the projectors power cycle. The screen drops when the projector powers up and retracts when the projector powers down.

To Projector

Red DC12V Green 0V

2.IR (Infrared) Wall Box Kit and Eye Receiver: The Wall Box Kit contains an IR receiver and enables the consumer to use either the IR remote or hard wire controls to operate the screens drop/rise capabilities. The IR eye protrudes from the bottom of the casing to present a low profile line-of-sight control option for your IR remote. It is a low- visibility alternative to using the wall box kit and its ability to protrude from the bottom of the screen, allows line-of-sight control even in a recessed ceiling installation.

Connection pins inside of case

Wall-mounted Receiver

(Extension Sensor)

Transmitter

Connection pins inside of case

Sensor

3.Bubble Level: Included with the installation package is a small bubble level that can be useful in determining if the screen is perfectly level when installing.

Bubble

NOTE: ① Please use the Down sign side as the bottom.

②The Bubble should be in the middle position to determine that it is level.