Fujitsu IRMC S2/S3 manual Transferring the IPv4 address, 417

Configuring the iRMC S2/S3 via SCCI and scripted configuration

Transferring the IPv4 address "192.23.2.4"

<DATA Type="xsd::string">192.23.2.4</DATA>

VCAUTION!

The xsd::string data type is restricted to readable strings, IP addresses and MD5-based user passwords.

For all other data, the xsd::hexbinary data type must be used!

IDo not directly specify the characters ä, ö, ü, etc. in strings unless they are actually needed by the using application!

Both SCCI and the ConfigSpace interface do not store any character encoding information. Thus, any non-US-ASCII- characters will be interpreted internally by the using application and therefore should be avoided.

If you do actually need to specify special characters, make sure that you edit and save your file in UTF-8 format including the correct BOM.

Command Status (Status)

After the configuration settings are transferred, the Status contains the result of the operation. If the operation has completed successfully, the value 0 is returned.

IFor a specification of all public configuration settings (ConfigSpace) see the SCCI_CS.pdf file, which you will find in the Help folder of the ServerView Agents installation package. Additionally, the SCCI_CS.pdf file is distributed with the PRIMERGY Scripting Toolkit.I

iRMC S2/S3 417