Menu Operation
Press ▲ / ▼ key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press Enter key to enter your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically saved as below:
Autoprogram Menu
NTSC Channel 19 |
| Not Found |
Analog Channels Found | 2 | |
Digital Channels Found | 0 | |
Progress(%) | 12 |
|
When the channels are found, use / to add it to the channel list.
Press Enter button to display a channel list that you can select channel as below:
Manual Channel Set Menu
Ch 42 | ATSCdmo | Viewable |
Ch 2 |
| Viewable |
Ch 11 |
| Viewable |
Ch 22 |
| Viewable |
Ch 31 |
| Viewable |
Ch 52 |
| Viewable |
Ch 54 |
| Viewable |
Ch 66 |
| Viewable |
Ch 68 |
| Viewable |
To Move Enter To Select M enu To Exit
Allows you to name the channel that is selected. Use ◄ / ► to move the cursor and use ▲/▼ to input the name and then press Menu or Enter to return or exit as following:
Channel Labels Menu |
|
Ch | ATSC dmo |
To Move Enter | To Change Menu To Exit |
To select language of the OSD such as English/ French and Spain
12