Stewart Filmscreen Corp CM-1005 Installing the infrared remote control option, Infrare d Sensor

Page 10

Installing the infrared remote control option

The optional Stewart Filmscreen infrared remote control allows control of the screens from anywhere in the room.

Note: The distance between the hand-held remote control and the receiver can be up to 50 feet / 15 m. It is necessary to have uninterrupted line-of- sight between the remote and the receiver.

Preparing the connection

Refer to the previous section “Installing the low-voltage 3-button switch option.”

Making the connection

Figure 6 illustrates the connection.

1.Mount the low-voltage control box near the screen.

2.Mount the infrared (IR) eye sensor near the screen.

3.Connect the low-voltage control box to the screen by connecting the screen motor power leads to the power strip terminal block located on the circuit board of the control box.

4.Connect the IR eye sensor to the small black plug-in module

located next to the switch input on the circuit board.

5. Connect the low voltage control box to the AC power source by connecting the AC line voltage to the power strip terminal block located on the circuit board of the control box.

6.Connect the switch to the low-voltage control box.

7.A parallel connection to an outboard audio-visual switching

network can be made at this time. (optional)

 

 

Infrared Sensor

AC

 

Infrared Remote Control

 

 

 

R/F Input

 

Line

 

 

Neutral

 

 

COMMON-White

InfraRed Input

 

UP-Red

 

STOP-Yellow

DOWN-Black

Low Voltage

COMMON-White

UP-Red

Switching

GROUND-Green

 

DOWN-Black

Low Voltage Control Box

Figure 6: Infrared remote control wiring

4 Conductor Hook-up Cable—20-24ga Recommended

3-Button

Category 5 Typically Used (NOT Supplied)

Momentary

 

 

 

 

8

Stewart Filmscreen Corporation

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Visionary Electriscreen Page Contents About your Visionary Electriscreen Preparing the InstallationTo the Owner PreparationUnpacking Hanging the Case Removing the screen assembly from the caseSupport Structure To Electrical Romex Source Connector Case Mounting the caseRomex Connector Screen Electrical Connection Electrical HOOK-UPPreparing the connection Installing the high voltage switch controlAC Power Making the connectionsMaking the connection Installing the low-voltage 3-button switch optionButton Momentary Switch Low Voltage Control BoxButton Installing the infrared remote control optionInfrare d Sensor Stewart Filmscreen CorporationConnecting the Video Interface Control System Vics Terminal Block 12V Trigger Wire to ProjectorInstalling the wireless remote control option Installing the Screen Assembly Into the Case Case Modular Connectors Screen Assembly Ceiling CoverOperating the Screen Adjusting the Screen Extension Limit Switches ScreenModifying the extension of the screen General maintenance Screen Care and CleaningReplacement parts and service Correct can damage motor TroubleshootingUntil this problem is resolved Screen. Do not use the unitCan damage motor and screen Adjustment. Failure to correctProblem is resolved Do not use the unit until this

CM-1005 specifications

Stewart Filmscreen Corp CM-1005 is a cutting-edge product in the realm of high-quality projection screens designed for professional and commercial environments. This versatile screen is engineered to enhance the visual experience, whether for corporate presentations, movie screenings, or immersive entertainment setups.

One of the primary features of the CM-1005 is its exceptional projection surface, which utilizes advanced materials to deliver stunning image quality. The screen's high gain properties ensure that images are not only bright but also vibrant and true to life, making it an ideal choice for environments with varying light conditions. The matte finish minimizes reflections and hotspots, promoting an even distribution of light across the entire surface.

The CM-1005 also incorporates innovative technologies that contribute to its performance. The screen is designed with Stewart Filmscreen's proprietary Ultra-Resolution technology, which enhances detail and clarity in both 2D and 3D applications. This technology is particularly beneficial for high-definition content, allowing viewers to experience images with incredible depth and sharpness.

Another significant characteristic of the CM-1005 is its flexible installation options. The screen can be easily integrated into various settings, whether used in a fixed frame configuration or as a retractable option. The various mounting choices allow for seamless adaptation to different room dimensions and projector setups, providing users with a customized solution that fits their specific needs.

The durability of the CM-1005 is also noteworthy. Constructed from high-quality materials, the screen is designed for longevity, resisting wear and tear even after extensive use. It is easy to clean and maintain, ensuring it retains its original performance over the years.

Additionally, the Stewart Filmscreen Corp CM-1005 includes acoustic transparency if needed, allowing audio to pass through the screen without distortion. This feature allows for optimal audio-visual synchronization, making it perfect for applications that prioritize sound quality alongside picture clarity.

In summary, the Stewart Filmscreen Corp CM-1005 stands out with its superior projection surface, advanced technology integration, flexible installation options, and durable build. It represents a premium choice for professionals seeking an exceptional viewing experience in diverse environments, combining functionality with high-performance capabilities.
Top Page Image Contents