Step 2
Wooden Stud Mounting
Using an electronic stud finder, locate the center of the wooden stud. Position the Wall Plate (2) in desired mounting location over stud.
Level the Wall Plate, and then using the Wall Plate as a template, mark mounting hole locations over the center of the stud.
Using a 5mm drill bit, drill 3 mounting holes into the stud to a depth of 80mm.
Securely mount Wall Plate with supplied Long Bolts (J) and Washers (K). (Fig. 2) Important: Dab a bit of liquid soap onto the bolt threads before the driving
bolt into the stud. This makes the installation easier, and will prevent damage from occurring to the bolt.
Fig. 2
L
K
J
Masonry Mounting
Position the Wall Plate (2) in desired mounting location on wall.
Level the Wall Plate , and then using the Wall Plate as a template, mark mounting hole locations on wall.
Using a 10mm masonr y bit, drill 3 mounting holes into masonr y to a depth of 80mm.
Insert Wall Anchors (L) into the mounting holes, and lightly tap them flush to the wall with a hammer, as shown in Fig 2.
Caution: Wall Anchors should only be used for masonr y mounting. NEVER use wall anchors to mount this mount to dr ywall.
Securely mount Wall Plate with supplied Long Bolts (J) and Washers (K). (Fig. 2)
Step 3
This mount Monitor Plate is VESA compliant, and supports the following VESA Patterns ( Fig. 3):
A: VESA 75 (75mm x 75mm)
B: VESA 100 (100mm x 100mm)
C: VESA 200 (100mm x 200mm)
D: VESA 200 (200mm x 200mm)
Non VESA compliant displays will require an optional adaptor plate. Contact your dealer for details.
For details on attaching the Monitor Plate to a Adaptor Plate, turn to page 8.
Fig. 3
D
C | B | B | C |
D
Attach Monitor Plate to back of the monitor with 4mm, 5mm, or 6mm mounting Screws.
Note: Some monitors with recessed mounting lands, will require the use of Spacers (I), as shown in Fig. 4.
Caution: Never force screws into the monitor, as damage may occur. NEVER use an electric drill to secure screws.
|
|
|
| |
|
| |||