Replacing the Oxygen sensor

3.Gripping the entire analyzer, carefully turn over the analyzer and place it face-up on the flat surface.

4.Carefully remove the top half of the analyzer and place it face-down and to the right of the bottom half.

5.To close the analyzer, carefully place the top half of the analyzer on top of the bottom half. Ensure that all tubing and wiring is tucked inside the case. Ensure that the seal gasket is in place. Check for secure fit of the two halves.

6.Gripping the entire analyzer, carefully turn over the analyzer and place it face- down on the flat surface.

7.Replace all six (6) screws into the back of the analyzer and tighten snug with a phillips screwdriver.

Typically the oxygen sensor needs to be replaced every eight (8) to ten (10) months. The following procedure is a step by step guide to replacing the oxygen sensor. Refer to Figure “A”, Sensor Installation/Replacement Procedure for more detailed information.

1.Open the analyzer (see Opening / Closing the Analyzer).

2.Carefully pull the oxygen sensor straight up out of the case.

3.Disconnect the ribbon cable from the top of the sensor by lightly spreading open the two side ejector locks.

4.Gently pull the blue input tube off of the center sensor barb. Next, unscrew the barb lock fitting off of the sensor sample exhaust output.

5.Discard used sensor.

6.Reconnect the ribbon cable to the top of the new sensor by gently pushing the cable plug into the sensor socket until the two side ejector locks close.

7.Reconnect the blue sample tube to the center sensor barb and reconnect the sample exhaust tube to the barb lock fitting.

8.Carefully place the oxygen sensor back down into the case. Make sure that the sensor is pushed down towards the bottom of the case to prevent the sensor from interfering with the top circuit board.

9.Close the analyzer (see Opening / Closing the Analyzer) and calibrate (see Oxygen Calibration).

Teledyne Analytical Instruments

pjnmoo385 specifications

Teledyne pjnmoo385 is a cutting-edge imaging sensor designed for high-performance applications in various fields, including aerospace, defense, and industrial inspection. This advanced device integrates state-of-the-art technology to deliver superior performance, reliability, and adaptability, making it an essential tool for engineers and researchers alike.

One of the main features of the pjnmoo385 is its high resolution, which allows for the capture of detailed images even in challenging environments. With an impressive pixel count, the sensor is capable of producing images that retain clarity and detail, enabling precise analysis and inspection processes. This characteristic is particularly valuable in applications that require meticulous attention to detail, such as semiconductor inspection and quality control.

The pjnmoo385 utilizes advanced sensor technologies, including low-noise amplification and rapid readout capabilities. These features ensure that the device operates efficiently, minimizing signal interference and preserving image quality even in low-light conditions. The result is an imaging sensor that can deliver consistent performance across a range of lighting environments, making it ideal for both laboratory and field applications.

Another key characteristic of the pjnmoo385 is its versatility. It is compatible with various imaging systems and can be integrated into existing setups with ease. This adaptability allows users to implement the sensor in diverse applications, whether for scientific research, military surveillance, or industrial automation. Moreover, the sensor's compact design ensures that it can be used in environments where space is at a premium.

The pjnmoo385 also boasts robust thermal and environmental resistance, ensuring reliable operation in demanding conditions. This capability allows it to function effectively in a wide range of temperatures and humidity levels, making it suitable for outdoor and rugged applications.

In summary, the Teledyne pjnmoo385 is an innovative imaging sensor that combines high resolution, exceptional noise performance, and versatility. Its advanced technologies and robust characteristics make it an ideal choice for professionals looking to enhance their imaging capabilities, whether in research laboratories or industrial environments. With its ability to deliver high-quality images under various conditions, the pjnmoo385 stands out as a leading solution in the field of imaging technology.