Euphonix MADI Converters Operation Manual | DM714 and MD704 Converters |
|
|
|
|
3.4DM714 Rear Panel
Figure 3-2 DM714 Rear Panel
Input Voltage Selector: This red switch allows the unit to operate in either 110/
115 VAC or 220/230/240 VAC environments. A fuse must also be changed for 220/ 230/240 VAC operation (see page 6). Units are shipped set and fused for 110/115 VAC.
Power Connector (IEC) and Fuse Tray: The IEC power connector accepts standard IEC power cords. The fuse tray contains both the active fuse and a spare fuse for 220/ 230/240 VAC operation. See page 6 for instructions on how to change the fuse for 220/ 230/240 VAC operation.
AES/EBU Digital Inputs (female XLR): 12 AES/EBU stereo inputs.
Parallel AES/EBU Digital Inputs (female DB25): Three
Auxiliary Analog Inputs (female XLR): Two balanced analog inputs on XLR connec- tors. Input sensitivity is set from the front panel.
Auxiliary AES/EBU Digital Input (female XLR): Stereo AES/EBU digital input on one XLR connector. Functions in parallel with the auxiliary S/PDIF input and the two inputs should not be used simultaneously.
Auxiliary S/PDIF Digital Input (RCA): Stereo S/PDIF digital input on one RCA con- nector. Functions in parallel with the auxiliary AES/EBU input and the two inputs should not be used simultaneously.
AES Sync In (female XLR): Master clock input for the converter when using AES as Sample Rate Source.
AES Sync Thru (male XLR): Outputs the same signal connected to AES Sync In.
Word In (BNC): Master clock input for the converter when using Word Clock as Sample Rate Source.
24