Connection to an Audio System
Method 1
Stereo system
Analog audio input jacks
AUDIO | R | L |
Audio cable
(supplied)
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Digital audio input jack
COAXIAL
Audio Coaxial
Digital cable
(commercially
available)
AUDIO OUT L
DVD player
AUDIO OUT L
DIGITAL AUDIO OUT
(Analog) | DIGITAL AUDIO OUT |
| |
AUDIO OUT |
|
| COAXIAL R |
DIGITAL
AUDIO OUT
COAXIAL R
Note
•If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set “DOLBY DIGITAL” to “ON” in the AUDIO menu. (Refer to pages
•The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck.
•Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “OFF” in the AUDIO menu. Playing a DVD using incorrect settings may genarate noise distortion, and may also damage the speakers. (Refer to pages
•Set “DOLBY DIGITAL” to “OFF” in the AUDIO menu for con- necting to an MD deck or DAT deck. (Refer to pages
•By hooking this unit up to a
Setup
Rear Terminals
AUDIO OUT jacks |
| COMPONENT VIDEO OUT jacks | |
Connect the supplied audio cables here |
| Connect optional component video cables here | |
through the audio in jacks of a television or |
| through the component video in jacks of a television. | |
other audio equipment. |
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT L |
| Y | CR/PR |
|
|
| COMPONENT |
DIGITAL AUDIO OUT |
|
| VIDEO OUT |
COAXIAL | R | VIDEO CB/PB | |
|
| OUT | OUT |
COAXIAL jack |
| VIDEO OUT jack |
Connect an optional coaxial digital audio |
| Connect the supplied yellow video |
cable here through the coaxial digital audio |
| cable here through the TV’s video |
in jack of a decoder or audio receiver. |
| in jack. |
|
|
|
Connect an optional