Troubleshooting

Additional Information

If you experience any of the following difficulties while using the system, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest service center by calling 1-800-898-9020.

No power.

•Is the power cord firmly plugged into the power outlet?

•One of the safety mechanisms may be operating. In this event, unplug the player from the power outlet briefly and then plug it in again.

No picture.

•Check that the system is connected securely.

•The video connecting cord is damaged. Replace it with a new one.

•Make sure you connect the system to the video input connector on the TV. (see page 14)

•Make sure you turn on the TV.

•Make sure you select the video input on the TV so that you can view the pictures from this system.

Noise (interference) appears in the picture.

•Clean the disc.

•If video from this system has to go through your VCR to get to your TV, the copy-protection applied to some DVD programs could affect picture quality.

The aspect ratio of the screen cannot be changed even though you set “TV SYSTEM” in the SETUP menu when you play a wide picture.

•The aspect rate is fixed on your DVD disc.

•Depending on the TV, you may not be able to change the aspect ratio.

There is no sound or only a very low-level sound is heard.

•The audio connecting cord is damaged. Replace it with a new one.

•The system is in pause mode or in slow-motion play mode, or fast forward or fast reverse is performed

•Press PLAY to return to normal play mode.

Severe hum or noise is heard.

•Move your TV away from the audio components.

•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

•Clean the disc.

The remote does not function.

•Remove any obstacles between the remote control and the system.

•Move the remote control closer to the system.

•Point the remote control at the remote sensor on the front panel.

•Replace all the batteries in the remote control with new ones if they are weak.

•Check that the batteries are loaded correctly.

BARBIE BAR330_Eng P13-26.p65

The disc does not play.

•Insert a disc.

•Insert the disc correctly with the playback side facing down on the disc tray.

•Clean the disc. (see page 12)

•The system cannot play CD-ROMs, etc. (see page 11) Insert a DVD or a CD disc.

•Check the region code of the DVD disc. (see page 11)

•Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. (see page 9)

The system starts playing the DVD automatically.

•The DVD features the auto playback function.

Playback stops automatically.

•Depending on the disc, the auto pause signal is recorded. While playing such a disc, the system stops playback at the signal.

Stopping playback, Search, Slow-motion play, repeat play or Program play, etc., cannot be done.

•Depending on the disc, some of the above operations may not be available.

Messages do not appear on the TV screen in the language you want.

•Select the language for OSD in SETUP menu. (see page 20) The disc must have the language you selected, if not, other language will be selected.

The language for the sound cannot be changed when you play a DVD.

•Multilingual sound is not recorded on the DVD.

•Changing the language for the sound is prohibited on the DVD.

The language for the subtitles cannot be changed when you play a DVD.

•Multilingual subtitles are not recorded on the DVD.

•Changing the language for the subtitles is prohibited on the DVD.

The subtitles cannot be turned off when you play a DVD.

•Depending on the DVD, you may not be able to turn the subtitles off.

The angles cannot be changed when you play a DVD.

•Multi-angles are not recorded on some DVDs.

•Change the angles when the angle marks appears on the TV screen. (see page 17)

•Changing the angles is prohibited on some DVDs.

The system does not operate properly.

•Static electricity, etc., may affect the system’s operation. Disconnect the AC power cord once, then connect it again.

2/2/2007, 3:30 PM

BAR330 specifications

The Emerson BAR330 is a powerful and versatile single-phase air compressor that has gained attention in various industries for its reliability and high performance. Designed for both industrial and commercial applications, the BAR330 stands out with its compact design, efficiency, and advanced technology.

At the heart of the Emerson BAR330 is its robust motor, which ensures optimal power output. This compressor operates at a maximum pressure of 145 PSI, making it suitable for a variety of tasks, from powering pneumatic tools to inflating tires. The motor is also engineered for energy efficiency, which helps to reduce operational costs over time while maintaining performance.

One of the main features of the BAR330 is its oil-free design. This not only enhances the longevity of the compressor but also eliminates the need for regular oil changes and maintenance. The oil-free operation is particularly beneficial in environments where oil contamination is a concern, such as in food processing or pharmaceutical manufacturing.

The BAR330 is equipped with advanced cooling technology to prevent overheating during extended use. The integrated cooling fan improves airflow, allowing the compressor to stay cool even under heavy workloads. This is particularly valuable in high-demand situations where reliability and durability are essential.

Another significant characteristic of the Emerson BAR330 is its user-friendly control panel. The intuitive interface allows operators to easily monitor pressure levels and adjust settings as needed, contributing to efficient operation. Additionally, the compressor features built-in safety mechanisms, including thermal overload protection and a pressure relief valve, which ensures safe operation and protects against potential damages.

The compact and portable design of the BAR330 makes it easy to transport and maneuver in various settings. This is especially important for contractors and service technicians who often work in different locations. Its sturdy construction ensures that it can withstand the rigors of job sites while providing consistent performance.

In summary, the Emerson BAR330 is a reliable air compressor that combines efficiency, portability, and advanced technology. Its oil-free operation, robust motor, and superior cooling capabilities make it an excellent choice for a wide range of applications. Whether for industrial tasks or everyday use, the BAR330 delivers performance that meets and exceeds expectations, ultimately making it a valuable addition to any toolkit.