ViewSonic N3200w manual Antenna Installation Instructions, Cleaning the LCD

Page 5

Antenna Installation Instructions

1 Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded to avoid voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2 Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

Do not disconnect the antenna or the power cord during a heavy storm as lightning may strike while you are holding the cable cord, causing serious injury. Turn off your LCD and wait for the weather to improve.

3 Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits. When installing an outside antenna system, extreme care should be taken to keep from touching the power lines or circuits as contact with them may be fatal.

Cleaning the LCD

MAKE SURE THE LCD IS TURNED OFF

NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE

To clean the screen:

1.Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

2.If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1.Use a soft, dry cloth.

2.If still not clean, apply a small amount of non-ammonia, non-alcohol based, mild nonabrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

ViewSonic does not recommend the use of any ammonia or alcohol-based cleaners on the LCD screen or case. Some chemical cleaners have been reported to damage the screen and/or LCD case. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

Image 5
Contents Page Contents Product disposal at end of product life Product RegistrationInstallation Important Product Safety InstructionsCleaning the LCD Antenna Installation InstructionsGetting Started Package ContentsVOL + Front View of the ProductCard Reader 10.ANT Rear View of the ProductVOL -/+ Remote ControlMenu ZoomWide 16. PC/DVIMute 33. TV34. AV Attaching the AV Tuner Box InstallationAttaching the Speaker Remote Control Battery Installation Cable Connections Power Cable ConnectionTurning the TV Power On OSD Functions Function Name Explanation Image AdjustmentSource Input TV/AV/S-Video/SCART Audio Adjustment Settings Menu PIP Screen SettingTV settings ViewSonic N3200w Color settings Source Input PC Source Input DVI-D Appendix SpecificationsRemote control unit does not operate No powerPower is cut off suddenly Poor or no pictureViewSonic N3200w Limited Warranty FCC Warning Safety Guidelines