ENGLISH
Using the TV Features
Operation
TurningtheTVOnandOff
Press the POWER button on the remote control. You can also use the Power button on the front of the panel.
Changing Channels
1.Using Channel Buttons
Press CHźŸ button to change channels, and the TV changes channels in sequence. You will see all channels that have been memorized.
Channels erased or not memorized will not be shown.
2.Using Number Buttons (1)ATV
The
channels.
(2)DTV
Use
Press 8 press 0 press
ʳReturn to the previous channel, press LAST button.
AdjustingtheVolume
Press VOLŸ/źbutton to adjust volume. To turn off the volume, press MUTE button.
To restore volume, press MUTE button again, or press VOLŸ/źbutton directly.
ViewingtheDisplayedInformation
To display the current information of the LCD TV: Press INFO button, and the current state will be displayed on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type, etc., depending on what input source it is in)
Selecting the TV Signal Source
With the TV on, press SOURCE button on either the TV or the remote to choose from:
TV, Composite Rear, Composite Side,
Rear,
VGA, HDMI 1, HDMI 2, HDMI 3.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States
ViewSonic | 22 | N4290p/14790p |
Downloaded From