ViewSonic N4280p manual Setting Sound, Adjusting the Volume, Customizing the sound, ViewSonic

Setting Sound

Adjusting the Volume

Using the volume buttons (VOL+ and VOL-)

Press the VOL + or VOL- to increase or decrease the volume.

Using the Mute

At any time, you can temporarily cut off the sound using the MUTE button. Press the MUTE button again to restore.

Customizing the sound

1	Press MENU to display the main menu.
2	Press 3or4to display AUDIO menu page, press 6to enter.
3	Within the menu, use 5or6 to select item, use3or4 to
	adjust.
4	Press EXIT button to return to TV viewing.

	AUDIO
Headphone volume	015
Treble	050
Bass	050
Balance	050
Focus window out	Speaker
AVC	ON

Option	Function	Choice/Remarks
Headphone	Adjusts headphone volume.	4: stronger
volume		3: weaker
Treble	Adjusts Treble (high sounds).	4: stronger
		3: weaker
Bass	Adjusts Bass (low sounds)	4: stronger
		3: weaker
Balance	Adjusts volume balance (left and right volumes).	4:Higher volume from right speaker.
		3:Higher volume from left speaker.
	=In twin window mode(PIP or PBP), if “speaker” is
	selected, then the focus window* sound is output from
	speakers while the other window sound is output from
Focus window	headphone. (Default setting)
	=If “Headphone” is selected, then the focus window	Speaker/Headphone/Both
out	sound is output from headphone while the other
(PIP or PBP mode only)	window sound is output from speakers.
	=If “Both” is selected, then both speakers and
	headphone output focus window sound(as for the
	other window, this menu item will be set to “None”
	automatically).
	Each broadcasting station has its own signal conditions,
AVC	which can make it necessary to adjust the volume every
	time the channel is changed. Turning "AVC" On lets	ON/OFF
(auto volume	you automatically adjust the volume of the desired
control)	channel by lowering the sound output when the
	modulation singal is high or by raising the sound output
	when the modulation signal is low.

Notes:

The menu items may be different when the unit works in different mode.

Focus Window Out menu item is available only in twin window mode (PIP or PBP) and either window’s

program is not in Rating Blocked. If “Both” is selected and later on if either window’s program comes into Rating Blocked, the sound may be mute. To cancel, please exit the Rating Blocked state for the program and then set this menu item to other proper choice.

Normally the main picture is default focus window. You may select sub picture as focus window by pressing OK

button and a green border will appear on it.	22	N4280p
ViewSonic