BASIC OPERATION
To operate the function of your LCD TV, you can use your remote control or those buttons above your LCD TV to set input sources, such as OSD sources, volume adjusting, and ect.
Powering the LCD TV
Before using the LCD TV:
1.Insert the power plug.
2.Connect external equipment properly.
3.Turn on the Main AC Power Switch. (If the LCD TV will not be used for a long period of time, please turn it off)
Power On/Off
To turn the LCD TV on/off :
Press the POWER button under the LCD TV or press the Power button on your remote control to turn on/off the TV. The power LED indicator lights up when the LCD TV is working.
Select input source
To select the required input sources. Use 
to move your cursor bar, and input with Enter.(please refer to page 15 )
VOLUME Adjusting
Press | or |
|
If you prefer to deaden the volume, press MUTE. |
| |
If you want to open the volume, press MUTE again, or press | directly to | |
adjust the sound. |
| |
INFO –
To display the information of current source and TV channel. Press INFO, and the current state will be displayed on the screen.
Channel Select
Press number key, 
button to select your desired channel.
If your desired channel is below 100, directly press number key. If your desired channel is over 100, press 100+ key first, and then press the other two number keys.
Ex: Your desired number is 8.
Press 0 
press 8 or press 8 only.
Ex: Your desired number is 110.
Press 100 
press 1 
press 0.
E N G L I S H
ViewSonic N2750w 17