ENGLISH
Other Information
Problem | Possible Solution |
Remote control unit does | • Make sure the directions of batteries are inserted correctly |
not operate | referring to the user guide. |
| • Batteries could be weak or dead. Replace with new batteries. |
| • Is a fluorescent light illuminated near the remote control |
| sensor? |
| • The path of the remote control beam may be blocked. Make |
| sure the path is clear and that the remote control is aimed at |
| the remote control sensor on the TV. |
| • Press the POWER button on the remote control to see if you |
| can turn on the TV. |
| • Press MENU button on the remote control to see if there is a |
| MENU shown on the screen. |
| • Press only one button at a time and it is the correct one for |
| the operation you want to perform. |
|
|
Unit cannot be operated | • External influences such as lightning or static electricity may |
| cause improper operation. In this case, operate the unit after |
| first turning on the power of the LCD TV and the AVC |
| System, or unplug the AC cord for 1 to 2 minutes, then |
| replug again. |
Power is cut off suddenly • Is the sleep timer set in advance?
•Is there no signal in PC mode or HDMI mode?
•The internal temperature of the unit has increased. Remove any objects blocking the vent or clean as necessary.
No CATV reception (or no • Is the AIR/CABLE option set correctly? Please set the AIR/
reception above CH13) CABLE option to CABLE referring to the user guide.
•CATV is connected improperly or not connected; please check all the CATV connections.
•The cable TV service is interrupted; please contact your cable operator.
Picture is cut off/with • Is the image positioned correctly?
sidebar screen• Are screen mode adjustments such as picture size set correctly?
•Press WIDE button repeatedly on the remote control to see if you can get the picture you prefer.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States
ViewSonic | 44 | VT2730 |