Other Information
| Poor color or no color | ||
| • The station may have broadcast difficulties. Try another channel. | ||
| • Check the AV Input mode when you use Video or YPbPr (page 29). | ||
| • Adjust the Tint and/or Color (page 26). | ||
| Poor composite picture | ||
| • If the TV is connected to an external A/V device (e.g., DVD player, | ||
|
| video game system, | |
|
| video connection instead. | |
| Picture and sound are out of sync | ||
| • As with all products that contain a digital display, in rare instances, | ||
|
| when viewing certain content (e.g.. television broadcasts, video | |
|
| games, DVDs), you may notice that the sound and picture are | |
Picture problems |
| slightly out of sync. This phenomenon can be caused by various | |
|
| factors including, without limitation, video processing within the | |
|
| TV, video processing in an attached gaming system, and video | |
|
| processing or different compression rates used by broadcasters | |
|
| in their programming. You may want to try one or more of the | |
|
| following suggestions, which may help to reduce the effect of this | |
|
| phenomenon: | |
|
| ||
|
| programmable audio delay feature, use this feature to help | |
|
| synchronize the sound to the picture. | |
|
| ||
|
| please contact your local broadcast, cable, or satellite provider to | |
|
| inform them of this issue. | |
|
| ||
| • Check the antenna/cable connections. | ||
| • The station may have broadcast difficulties. Try another channel. | ||
| • The sound may be muted. Press VOLUME. | ||
| • If you hear no sound, try setting the MTS feature to Stereo mode | ||
Sound problems |
| (page 28). | |
• | If you are not receiving a second audio program from a known SAP | ||
| |||
|
| source, make sure the MTS feature is set to SAP mode (page 28). | |
| • If you hear audio that seems “incorrect” for the program you are | ||
|
| watching (such as music or a foreign language), the SAP mode may | |
|
| be on. Set the MTS feature to Stereo mode (page 28). | |
|
| ||
| • Remove all obstructions between the remote control and the TV. | ||
| • The remote control batteries may be dead. Replace the batteries (page | ||
Remote control problems |
| 22). | |
| • If the TV still does not act as expected, use the Reset Factory Defaults | ||
|
| procedure (page 32). | |
|
|
| |
ENGLISH
ViewSonic | 27 | VT3210LED/VT4210LED |