Basic Operation
To operate the function of your LCD TV, you can use your remote control or those buttons above your LCD TV to set input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1.Insert the power plug.
2.Connect external equipment properly.
3.Turn on the Main AC Power Switch, located on the rear of the cabinet. (If the LCD TV will not be used for a long period of time, please turn it off) The power LED indicator will be red when AC Power Switch is on.
Power On/Off
To turn the LCD TV on/off :
Press the POWER button under the LCD TV or press the Power button on your remote control to turn on/off the TV. The power LED indicator is green when the LCD TV is on.
Select input source
Select the required input sources. Press the “Input” button at the right side of the LCD TV or on the remote control repeatedly until the desired source appears.
VOLUME Adjusting
Press
To silence the volume, press MUTE on the remote control.
If you want to restore volume, press MUTE again, or press VolŸ and Volź on the remote control directly.
Channel Select
To select the channel you want, press
Use the button
Return to the previous channel, press RECALL on your remote control.
ENGLISH
ViewSonic | N2600w | 22 |
Downloaded From