ViewSonic VS10576-1E manual GRAPHICS-Adjust the Graphics

GRAPHICS—Adjust the Graphics

BY OSD MENU

The graphics menu is only active in “RGB.” However, in “Component” mode, phase function will be available.

When in PIP/PBP/Multi Window screen, graphics menu only works on main screen. In sub screen, it is unable.

Press MENU.

Press	to select Graphics.
Press ENTER.
Press	to select the desired
item you want to adjust.
Use	to adjust it.

Press EXIT to close the recent page.

Press MENU again to leave OSD Menu.

Auto Adjust: Auto adjust picture’s horizontal position, vertical position, fine tune and H-Size .

H. Position: To adjust the horizontal position of the graphic.

V. Position: To adjust the vertical position of the graphic.

Phase: To remove any horizontal distortion and clear or sharpen the display characters.

E N G L I S H

ViewSonic N2750w 21