ENGLISH
Using the TV Features
Annotations for OSD Menu Items
See below for meanings of the control items in each menu.
Video menu
•Picture Mode: To select picture mode.
•Noise Reduction: To reduce the noise level of connected equipment.
•Brightness: To adjust luminance of video.
•Contrast: To adjust contrast of video.
•Color: To adjust color.
•Tint: To adjust tint level.
•Sharpness: To adjust picture sharpness.
•Back Light: To brighten or darken the backlight.
•Color Temperature: To select color temperature.
•Auto Adjust: To auto adjust picture’s horizontal position, vertical position, fine tune and
•VGA: To fine tune the image. (only enabled in VGA source)
＊H. Position: To adjust the horizontal position of the picture.
＊V. Position: To adjust the vertical position of the picture.
＊Phase: To adjust delay time of phase in order to reduce the noise of picture.
＊Clock: To adjust delay time of clock in order to reduce the noise of picture.
Audio menu
•Balance: To adjust left and right audio balance.
•Bass: To adjust bass.
•Treble: To adjust the treble.
•Surround: To select concert hall effect “On” or “Off”.
•Reverb: To select the reverb sound effect.
•Equalizer: To select equalizer modes.
•SPDIF Type: To select audio for SPDIF out.
•Auto Volume control: To turn On or Off Auto volume control.
•Audio Only: To turn off the screen picture but keep the sound on.
TV menu
•Tuner Mode: To select TV source. Select “Cable” to watch cable TV channels, and select “Air” to watch air TV channels.
•Auto Scan: To auto scan TV and DTV channels.
•Channel Skip: To skip channels.
•MTS: To select audio mode.
•Audio Language: To select available audio language.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States
ViewSonic | 36 | N2635w |