Basic Operation

Loading a DVD/VCD/CD Disc

1.Turn the ignition on the accessory position.

2.Press the POWER button (1).

3.Insert the disc with printed side facing up into the disc slot (2).

4.The player starts playback automatically.

Ejecting a Disc

Press (EJECT) button (3) to eject the disc.

Stopping Play

-Brief press the (Stop) button to stop the unit playback, when press the (Play) button it can continuous normal playback.

-Press (Stop) button twice, it will stop the playback and go back to initial Track/Chapter.

Rapid Forward/Rapid Reverse Press FF & REW during play. Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follow. DVD/VCD/CD/MP3:

Normal Playback 2X 4X 6X 8X

Skipping Track

Press / on the remote handset or front panel during playback.

Press to skip to next track, and to back one track.

Note: For some VCD 2.0 discs

(PBC-playback control), and buttons may be unavailable.

Slow Motion Play

Press slow button during playback. Each time the button is pressed, the slow mode changes according to the disc as follow. DVD:

Normal PlaybackSF 2X SF 4X SF 8X SR 8X SR 4X SR 2X

VCD:

Normal Playback SF 1X SF 2X
SF 3X	10

Note: For VCD, in any slow mode, press ENTER button to return to normal playback.

Pause (still picture)

Pressing during playback will stop play temporary. Return to normal

playback, press once again.

Repeat

Press the REPEAT button to select repeat mode as follow.

DVD:

Press the REPEAT button to select repeat mode as follow.

CHAPTER REPEAT ON TITLE REPEAT ON

REPEAT OFF

VCD/CD:

Press the REPEAT button to select repeat mode as follow.

REPEAT OFF REP-ONE REP-ALL

1.Continuously repeat at the current chapter/ track, when selected REP-ONE mode.

2.Select REP-ALL mode to continuously repeat all chapter/track on the current disc.

3.When the player finish playback the current disc last chapter/track, it will stop display the elapsed time. When selected REPEAT OFF mode (REP-ONE & REP-ALL disappear at the screen display).

4.REPEAT feature does not support VCD2.0 (with PBC ON).

Aux input jack (4)

When the unit connect external A/V you can press the AUX on the remote controller to switch to the aux input mode.

Reset

Reset button is placed on the front panel and must be activated with a ball point pen or thin metal object. Reset button is to be activated for the following reasons:

•Initial installation of the unit when all wiring is completed.

•All the function buttons do not operate.

•Error symbol on the display.

Remote Sensor (IR)

Point the remote handset to the remote sensor. Receive the signal from remote handset.

Turning the player on/off

Press the (POWER) button on front of panel or press (POWER) button on remote control to turn the player on or off.