PYLE Audio PSWLE07 manual 406mm16, Part 1a-Wood Stud Mounting, Part 1b-Concrete wall mounting

Hardware Kit:			ID	Qty	Description
Wall plate		TV connection block	1	2	Long bolt
			2	2	Long bolt washer
			3	2	Wall anchor
			4	1	Box wrench
	Bubble level		A	2	M4×15mm bolt
			B	2	M4×16mm bolt
Supportable block
			C	2	M5×15mm bolt
	Supportable lever		D	2	M5×16mm bolt
					M6×15mm bolt
			E	2
			F	2	M6×16mm bolt
			G	2	M8×20mm bolt
1 2 3	4	A,C,E,G B,D,F,H I J	H	2	M8×16mm bolt
			I	2	M5 taper washer
			J	2	M5 washer

Part 1a-Wood Stud Mounting

Use wall plate as a template, make sure it is level, and mark two mounting holes along the center lines of the wood studs. Drill two 3/16”(5mm)dia.holes 2”(50mm) deep. Level wall plate and attach to wall with two long bolts(1) and two washers (2) by box wrench(4). Tighten screws firmly. Do not overtighten.

")

Wood stud 406mm(16

2”(50mm)	2
Φ3/16”(5mm)

1

4

Part 1b-Concrete wall mounting
Level wall plate and use wall as a template to mark two holes. Drill two 3/10”(8mm)
dia. holes 2”(50mm) deep. Insert two anchors(3) into holes and secure wall plate
with two long bolts(1) and two washers(2) by box wrench(4).Tighten screws firmly.
Do not overtighten.	")
	406mm(16

2”(50mm)

3

Φ3/8”(10mm)

2

1

4

Part 2-Attaching Supportable block and TV connection block To Screen

First, select the small(A,B), medium(C,D,E,F) or large(G,H) screws. To attach supportable block by using selected screws(A,C,E,G) and washers(I), and then attach TV connection block to screen by using selected screws(B,D,F,H) and washers

(J). Tighten screws firmly but do not overtighten. WARING screws(A,B,C,D)need washer, screws(E,F,G,H) don’t need washer.

			I
E,G		A,C	J
		I
F,H	J	B,D

	-3-
-2-