PYLE Audio PSW771 manual Thank you for choosing our product

Page 1

Part 5-Adjusting display and using cord management

Route cords along articulating arms using cord management clips(7). Articulating arms can be adjusted to position display into desired location. Use wrench to tighten and loosen the tension screw. Do not overtighten and do not loosen to the point the screws come out.

8

9

7

Thank you for choosing our product

P yle Audio

1600 63rd st , Brooklyn, NY, 11204 (718)236-8000

Warning

This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!

INSTALLATION GUIDE

Item No.:PSW771

TV size range: 32"~50"

Maximum weight capacity: 40 kg /88lbs

Adjustable angle: 0°12°

www.pyleaudio.com

1.Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, contact a professional installer for assistance.

CAUTION

MADE IN CHINA

2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced.

3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death.

This product was designed to be installed on wood stud walls and solid concrete walls. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Never exceed the Maximum Load Capacity. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.

-8-

Image 1
Contents Thank you for choosing our product Part 5-Adjusting display and using cord managementHardware Kit Part 3- Hanging display Part 1a-Wood Stud Mounting Part 2b-Attaching brackets to screen with recessed backPart 2a-Attaching Brackets To Screen With Flat Back Part 1b-Concrete Wall Mounting