2.FUNCTION KEYS
2.1FRONT PANEL FUNCTIONS
POWER: Press the "POWER" button once, To "POWER ON."
Press it again, to "POWER OFF."
MENU: Press MENU to Display OSD. Press again to exit MENU.
When in
UP/DN: Use to make item selection in OSD menus and to increase/decrease selection parameters.
3.MONITOR TROUBLE SHOOTING
3.1NO POWER
1.Make sure the power cable has been pluged in.
2.Check power source for +12V.
3.2REMOTE CONTROL NOT FUNCTIONING
1.Make sure the batteries are in good condition and installed properly.
2.Be sure to aim the remote control at the receiver and check to see there are no obstacles in between.
3.Perhaps, it is too far away from the receiver. Normal operating distance is approximately 20 feet.
3.3NO DISPLAY OR PICTURE NOT CLEAR
1.Check the video signal wires to ensure they are connected properly.
2.Check for source signal.
4