Daewoo DSL-20D1T instruction manual Connecting external equipment, Preparation, AV2/RGB TV

DSL20D1T(PAL)·º¿ GB 03.10.23 1:48 PM ˘ ` 6 mac001 1200DPI 90LPI

PREPARATION

Connecting external equipment

Settop box VCR

DVD Settop box

Camcorder VCR Video game

Headphone

6

PREPARATION

	TV/AV Mode Selection
	Whenever the AV button is pressed, the on-screen display will
	be changed as shown:
	TV	AV1(or AV1/S-video)	Component	AV2(or
	AV2/RGB) TV
	Note ::
TV	If you wish to use only the aerial (RF) connection, then you should
	make use of PR 00 on the TV set for best performance to tune in
	and record from a set top box or VCR.
	When the TV SET is no signal, OSD(On Screen Display) appears on
	the screen.
	AV Input Jack (AV1)
AV1	This jack has video / audio inputs.
	The jack is used to connect a Camcorder, VCR, Video game.
	S-video Input Jack (AV1/S-video)
	It has Y/C inputs.
	This jack is used to connect an S-Video Camcorder, S-video VCR.
AV1/S-video	Note ::
	The AV input Jack and S-video input Jack are shared connections
	with priority given to the S-video input Jack. When the S- video
	Jack is connected, the TV set switches automatically to AV1/S-
	video mode.
	Do not connect both the AV Input Jack and S-video Input Jack .
	Component Input Jack (Component)
Component	It has Y/Pb(Cb)/Pr(Cr) inputs and audio inputs.
	It is used to connect a DVD player.
	SCART Jack (AV2, AV2/RGB)
	This jack has video / audio inputs and outputs, RGB inputs.
	It is used to connect a STB, VCR.
AV2	In most cases, the TV set switches automatically to AV2 mode,
	when the external equipment connected is in playback mode.
	If not, then use the AV button to select AV2.
	In AV mode, you can change the TV programme number with the
	UP/DOWN button or the NUMBER button.
	Headphone Jack
AV2/RGB	Insert the headphone plug(3.5 mm		) into this jack.
	The sound from the speaker will be automatically cut off.
	You can control the headphone sound with the /			button.
				7

ENGLISH